Jump to content

Anyone who has experience with jbl ms-8 please help.....


jl10w3s

Recommended Posts

Hello all. I'm looking to see if anyone has any experience with jbls' ms-8 processor. Today a customer brought our shop a truck that needed a complete re-wire and new mids and highs all around. so we got it all wired up and followed all directions for proper connections and calibration for the ms-8 and everything seemed ok but when we turned on the system we were getting all kinds of crackling and distortion out of the mids and highs. We replaced all the rca's, speaker wire, etc. so we know thats not the issue. Just Curious if its a setting on the ms-8 we haven't found yet. If you have experience with this unit and may know what the problem could be I would greatly appreciate any positive input on the subject. Thanks

(2001 Dodge Durango R/T)

1- XS Power D2700

1-Alpine CDE-HD149BT (Head Unit)

1 pr.- Focal Polyglass 165v30 (Front Stage)

1 pr.- Hybrid Audio Technologies C61-2 (Rear Fill)

1-Kenwood Excelon XR-1S (Sub Amp)

1-Kenwood Excelon XR-4S (Mids-N-Highs Amp)

2- JL 10 W3v3-4 (Subs)

-2.3 Cubes tuned to 32 hz

1-1/0 ga. & Big III in 1/0

140 @45 hz db drag legal

(2008 Toyota Highlander Limited ---build in the works)

1- Kenwood DDX470 (Head Unit)

1 pr.- JL C3-650 (Front Stage)

1 pr.- JL C2-525 (Rear Fill, may upgrade to 6.5" C2 or C3 instead)

1- JL XD-400/4 (Mids-N-Highs Amp)

1- JL XD-600/1 (Sub Amp)

1- XS Power D3400

1- JL 10w3v3-2 (Sub)

1- JL 2 Ga. Amp Kit

1- BIG 3 in 1/0

1- self-built Fiberglass sub enclosure

Link to comment
Share on other sites

Bump.

(2001 Dodge Durango R/T)

1- XS Power D2700

1-Alpine CDE-HD149BT (Head Unit)

1 pr.- Focal Polyglass 165v30 (Front Stage)

1 pr.- Hybrid Audio Technologies C61-2 (Rear Fill)

1-Kenwood Excelon XR-1S (Sub Amp)

1-Kenwood Excelon XR-4S (Mids-N-Highs Amp)

2- JL 10 W3v3-4 (Subs)

-2.3 Cubes tuned to 32 hz

1-1/0 ga. & Big III in 1/0

140 @45 hz db drag legal

(2008 Toyota Highlander Limited ---build in the works)

1- Kenwood DDX470 (Head Unit)

1 pr.- JL C3-650 (Front Stage)

1 pr.- JL C2-525 (Rear Fill, may upgrade to 6.5" C2 or C3 instead)

1- JL XD-400/4 (Mids-N-Highs Amp)

1- JL XD-600/1 (Sub Amp)

1- XS Power D3400

1- JL 10w3v3-2 (Sub)

1- JL 2 Ga. Amp Kit

1- BIG 3 in 1/0

1- self-built Fiberglass sub enclosure

Link to comment
Share on other sites

During the gain calibration the volume needs to just barely make it say gain ok..

Not cranked.

Slowly turn it up and fin the sweet spot to where it just barely says ok..

2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz
Link to comment
Share on other sites

During the gain calibration the volume needs to just barely make it say gain ok..

Not cranked.

Slowly turn it up and fin the sweet spot to where it just barely says ok..

We got it all figured out, thanks

(2001 Dodge Durango R/T)

1- XS Power D2700

1-Alpine CDE-HD149BT (Head Unit)

1 pr.- Focal Polyglass 165v30 (Front Stage)

1 pr.- Hybrid Audio Technologies C61-2 (Rear Fill)

1-Kenwood Excelon XR-1S (Sub Amp)

1-Kenwood Excelon XR-4S (Mids-N-Highs Amp)

2- JL 10 W3v3-4 (Subs)

-2.3 Cubes tuned to 32 hz

1-1/0 ga. & Big III in 1/0

140 @45 hz db drag legal

(2008 Toyota Highlander Limited ---build in the works)

1- Kenwood DDX470 (Head Unit)

1 pr.- JL C3-650 (Front Stage)

1 pr.- JL C2-525 (Rear Fill, may upgrade to 6.5" C2 or C3 instead)

1- JL XD-400/4 (Mids-N-Highs Amp)

1- JL XD-600/1 (Sub Amp)

1- XS Power D3400

1- JL 10w3v3-2 (Sub)

1- JL 2 Ga. Amp Kit

1- BIG 3 in 1/0

1- self-built Fiberglass sub enclosure

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...