2002 Caddy (8) Fi Btl 18's (2) Rockford T15k's and TONS more! Ipad Air 2 In Dash Page 16

[meade916]

side by side....before and after

now my camera doesnt show EXACTLY how it looks in person......but the 12,000k is bright white with a purple tint to it.....no blue at all. I wish i could replicate it, but its so bright the camera doesnt know what to make of it LOL. You can see it hits the ground white as hell.

[meade916]

ok MORE misc. wiring.....there will probably be another relay in the mix but here is 7 - i also didnt want to use toggle switches so i went all remote. This is a pretty dope little setup from Oznium.com

i bought another remote and box so there will be another one in there soon. It should be here tomorrow.

[meade916]

here is a few BORING pictures that if i didnt show you guys, you would think it just wired itself up These remote controlled buttons RULE, F@CK toggle switches!!

before install i checked each and every wire to make sure they were doing what they were supposed to.

oh and BTW every one of those wires was solderd and heat shrunk (as usual)

Basicly its like this:

Remote 1

1: Amp 1 remote amps turned on one at a time due to current draw during "warm-up" The remote from the deck triggers the relay and the wireless box supplies the power when the button is hit. In other words, even though the wireless turns the amps on, it STILL needs the deck to be on for that to happen.

2: Amp 2 remote same as number 1

3: Air Compressors so they can be disabled (and dont come on in the middle of the night for example)

4: Disables the Switch-box so if he or someone else drives, it cant accidently be triggered. If you have ever hit a switch unexpectedly, or had the box fall on the floor and trigger it at 65mph, you know what i mean.

Remote 2

1: Blue LEDs and Digital Voltage Display on/off

2: Onboard PowerMaster Intellecharger on/off (eliminates the danger of having an outlet by the gas tank. Plug it in THEN turn it on with the remote)

3. Carputer Hard-Shutdown (in case the carputer freezes up he will be able to turn it off and reboot. The PC is buried so there will be no access to the button.

4. N/A - Future use....

please leave comments here:

http://www.stevemeadedesigns.com/board/ind...mp;#entry489133

thanks!!

[meade916]

small update.... B pillars needed to be in before the crossover rack and the crossover rack needed to be in before the wall trim.....and all that has to be done before the console gets bolted down. Well, the B pillars are done...i have a small mod to the old "handle" thing that is mounted right at the top but that wont stop me from getting the interior put back together. I also have Kick panels to wrap which will be no problem. A few misc. items to take care of and its ready to drive out for brake install and a little more interior (rear doors, rear hatch). Chicken wants to buy his own new rims - so im not dealing with that at all.

Im getting REALLY REALLY close

Center console is IN the truck and bolted down!! Here is the Carputer all mounted and wires cleaned up.

[meade916]

visors in ......that much closer to the finish line

please leave comments here:

http://www.stevemeadedesigns.com/board/ind...906&st=5700

thanks!!

[meade916]

of course MORE relays........

wiring of COURSE is all nice and ziptied clean......i didnt get a pic sorry!

[meade916]

slight update...still waiting on the (custom tailored) bottle-sock for the nitrogen bottle. I decided to get the Kick panels wrapped tonite. I know i might make it look easy but DAMN this shit is no joke. This isnt no cheap ass vinyl that basicly melts into place, this stuff is stiff one way and stretches a LITTLE the other way.

Anyway they are ugly before they are pretty but here goes.

[meade916]

here is todays SMALL update. Nick-nacks getting closer and closer to being done. Door sills installed today, the ones that i flattened out (used to say Cadillac and had a raised "grip") and i had my man Chris finish the smooth and paint for me. After wrapping the kick panels and running the visor monitor wires, i was FINALLY able to button both sides up. I still have little things to do but i am VERY close! Again i hope to get wheels and brakes on this thing within the next few weeks.

Bear with me here, its very hard to get a nice picture of something that is BLACK. Ill do my best though.

by the way if you dont know what a door sill is, its that shiny black piece right under the seat and runs between the B pillar and kick panel.

Please leave comments here:

http://www.stevemeadedesigns.com/board/ind...906&st=5780

thanks!!!

[meade916]

More progress.......guess what the hoopty went in for tonite If all goes well (no problems) she will be back tomorrow.

6 Piston Calipers is teh SHIT!!

16" Rotors like hoola hoops

[meade916]

Custom "bottle bag" Tailored up by Sean Kat my interior guy! He did a GREAT job, just the way i invisioned it! As you can see, the FUGLY bottle that you get when you exchange them in will ALWAYS look good now!

complete with a zipper FTMFW!!!

Sean Kat my awesome interior guy! The man behind the sewing machine!!

As you can see, it is in the shop for the night i dropped it off this evening after work