[meade916]

that tan "ass end" will be modified, filled, smoothed and wrapped black to match the other pieces......thats all for today though, my hands are RAW!!

[meade916]

got the top lid in today


















I do a lot of the interior myself, as you have seen......but when it comes to anything that needs a french seam, i take it to my man Sean Kat

please leave comments here


http://www.stevemead...d...906&st=5360


thanks!!

[meade916]

[meade916]

some GOOD updates! Got the glove box and the other piece under the steering wheel...












the Suede piece at the Airbag is getting embroidered right now with "SMD" (like my hats) down on the bottom right.......then when i get it back it will be tan no more

[meade916]

hows this for an update

remember this?






Sean Katt, my upholstery guy, is the greatest!























please leave comments here:

http://www.stevemead...d...906&st=5460

thanks!!

[meade916]

Headliner in, Airbag wrapped, dash finally bolted down, A pillars back in.......










****Since i know SOMEONE will say something about it, i just thought id mention (if you havent figured it out by now) that anything TAN in the vehicle (like these trim pieces) will be black or grey in the next few days. Its ugly like that but will be nice once i change it out.



Had my man Chris up on the paint again! Tons of misc parts and he handled it like a pro!
thanks Chris!

[meade916]

AGAIN, the UGLY tan trim pieces will soon be black or grey (depending on where they are)...it will look "right" soon. Also, the steering wheel is on its way out too....one thing at a time here!

[meade916]

here is a small update before i head out into the cold to run wires.......

yesterday i got the carpet in - now after i run tons of wires and extend the A/C controller wires out to the console i can actually start putting this together-together!

























tried to get a shot of the entire interior with the headliner minus the ugly tan trim - havent got the black (or grey) one yet.....




please leave comments here:

http://www.stevemead...mp;#entry461272

thanks!!

[meade916]

today i ran the wires to relocate the AC controlls to in the inside of the center console. Yes its a lot of pics but if i didnt show you, you would think it was too easy Its not that it was THAT hard, just time consuming - so heres the pics.

also, ive been DREADING having to do this for the longest time.......glad to get it done. To extend a plug with 23 wires = 46 solder joints and 46 heat shrinks so it does take some time.

[meade916]

SOOOO Glad to have this done!

[meade916]

time to build a spot to mount these things.....



























please leave comments here:


http://www.stevemead...mp;#entry468841


thanks!

[meade916]

[meade916]

after that set-up, i added another layer (not shown) and started to get my sand on...















its taking shape, tomorrow i will cut the LED holes out and finish sanding - then its time to wrap it and call it done!

[meade916]

This is ONLY 2 led's -









more layers, a few more pics. Its ready to wrap and install the LED's...tomorrow (or saturday)







Two of my favorite cans!











The big holes house the LED's, the little holes are how i am going to attach this back on the console. That cupholder door USED to have to open to get to those screws, now i have to go thru everything since its permanently enclosed now.





please leave comments here:

http://www.stevemead...mp;#entry471262

thanks!

[meade916]

[meade916]

please post comments here:

http://www.stevemead...d...906&st=5580

thanks!!

[meade916]

spent the day O'scoping they system and turning screws and gain knobs, fine tuning the 3sixty.2. Im happy to report NO clipping The alpine doesnt clip at all at full power so thats also good After tweaking gains for half the day, (no Eq'ing yet), i got started on some more LED's.

sucks to have to pull it apart but at least i CAN when needed to get to the critical parts It was designed for easy access to everything -








Soldered and heat shrunk.

[meade916]

please leave comments here:

http://www.stevemead...d...906&st=5600


thanks!!

[meade916]

i purchased a Viper 5900 and this man came by and worked till 11pm on it....as mentioned, he did a kick ass job!! thanks JACK!!!












after the removal of the ABORTION of an alarm that WAS in there, this is what was left..

[meade916]

now on to the 12,000k HID headlight install.....Lows, Highs AND fogs! These things are the shit! Also VERY easy to install!

here is the BEFORE, stock.