Jump to content

Recommended Posts

Here is some pics of my build its not everything but its all the pictures I have. I will add more later.

The whip:

imageuhm.jpg

Sub:

imagevuf.jpg

imageffll.jpg

In the box:

imageunl.jpg

Amp under seat:

imagegpp.jpg

Battery in compartment behind back seat:

imagefycq.jpg

And my my LEDs:

imagetlcu.jpg

To come:

Thursday I am getting a t400-4 for my speakers. For now I have rockford punch 6x8s in the front doors and 6.5 punch pros in my rear doors. But Imgoing to get t1 components for the front and move the 6x8s to the back and put the punch pros in the kicks.

More LEDs all over the cab to illuminate everything.

Another sa12 in a box sitting the same way. I have already put a box with 2 of them in there and it fit. I just had to scoot the seat up a little.

And another small battery in that compartment.

I have all 4 gauge stinger wire.

Opinions are welcomed! Let me know what would make it better.

03 Ford f150

2 Sa8 v2s

Ap 1800d...

Stinger 0 Guage

CA Auto/ Electric Big 3

Xs power d680 in parallel with new group 65 stocker

Soon to come another d680

Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back

Soon to come Pioneers all around

Focal Solid 4 Speaker Amp

Kenwood KDC-X896

Memphis Line Driver

My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/

Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee

Link to comment
Share on other sites

  • Replies 106
  • Created
  • Last Reply

All the wires that you can see around my amp are now rum under the carpet and a little slit in the carpet that lets them through. These are just some quick pics that I grabbed right after the install. O and I forgot I have my clarion eq that will be going in this weekend at my house. It's going to look like this in the armrest:

imageawx.jpg

03 Ford f150

2 Sa8 v2s

Ap 1800d...

Stinger 0 Guage

CA Auto/ Electric Big 3

Xs power d680 in parallel with new group 65 stocker

Soon to come another d680

Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back

Soon to come Pioneers all around

Focal Solid 4 Speaker Amp

Kenwood KDC-X896

Memphis Line Driver

My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/

Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee

Link to comment
Share on other sites

All of the equipment:
HU: Kenwood KDC252u
Eq: Clarion EQS746
Speakers: Front- Rockford Punch 6x8s, Rear- Rockford Punch Pro 6.5s

Speaker Amp: Focal Solid 4

Sub:2 Sundown Sa12s d4
Sub Amp: Sundown SAE1200d clamped at 1770
Battery: XS Power d680 run in parallel with stock
Wire: Stinger 4 gauge

03 Ford f150

2 Sa8 v2s

Ap 1800d...

Stinger 0 Guage

CA Auto/ Electric Big 3

Xs power d680 in parallel with new group 65 stocker

Soon to come another d680

Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back

Soon to come Pioneers all around

Focal Solid 4 Speaker Amp

Kenwood KDC-X896

Memphis Line Driver

My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/

Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee

Link to comment
Share on other sites

There ya go another LAB audio build. Log!!!

2007 Volvo S40 2.4i (no turbo :( )(Soon XS Power D2400) Stock battery for nowRockford Fosgate 4 gaugeAudioque 6.5" Mid Bass (front)Rockford Fosgate T1 Tweets (front)Rockford Fosgate T2 6.5" Mids (rear)Rockford Fosgats T600-4 (Mids and highs)Rockford Fosgate P3001Fi SSD 12" with PSI recone, building box<p>400 watts, 139.3 @ 42 hz , in the kick window open. Build log!!http://www.stevemeadedesigns.com/board/topic/159148-2007-volvo-s40-audio-build-start-to-current-comment/

Link to comment
Share on other sites

Another pic of the truck:

imageubz.jpg

My exhaust:

imageriz.jpg

imageowj.jpg

Ecu Tuner:

imagevdkt.jpg

More LEDs to be installed:

imagetjaw.jpg

Eq out of box:

imageeam.jpg

The exhaust has 2 of those tips and it exits in front of the reap passenger wheel.

My ecu tuner makes this bad boy fast and it has va voltage meeter on it.

These LEDs will be installed in all 4 corners of the truck and above the seat belt holders in the center if the cab. The entire cab will be illuminated.

03 Ford f150

2 Sa8 v2s

Ap 1800d...

Stinger 0 Guage

CA Auto/ Electric Big 3

Xs power d680 in parallel with new group 65 stocker

Soon to come another d680

Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back

Soon to come Pioneers all around

Focal Solid 4 Speaker Amp

Kenwood KDC-X896

Memphis Line Driver

My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/

Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee

Link to comment
Share on other sites

The LEDs that are mounted under the dash are from the 2 empty spaces in that box. There is a switch mounted directly under my hood release that turns them on and off. And the kit is from the motor cycle shop where I work but the LEDs are the same ones used in car kits.

03 Ford f150

2 Sa8 v2s

Ap 1800d...

Stinger 0 Guage

CA Auto/ Electric Big 3

Xs power d680 in parallel with new group 65 stocker

Soon to come another d680

Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back

Soon to come Pioneers all around

Focal Solid 4 Speaker Amp

Kenwood KDC-X896

Memphis Line Driver

My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/

Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee

Link to comment
Share on other sites

I'm going to paint the ecu tuner mounting pod, some spots on my dash that are chipping, and my steering wheel where the paint is rubbing off. And install my clarion. Hopefully this weekend.

03 Ford f150

2 Sa8 v2s

Ap 1800d...

Stinger 0 Guage

CA Auto/ Electric Big 3

Xs power d680 in parallel with new group 65 stocker

Soon to come another d680

Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back

Soon to come Pioneers all around

Focal Solid 4 Speaker Amp

Kenwood KDC-X896

Memphis Line Driver

My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/

Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee

Link to comment
Share on other sites

I put my friends 2 sa's in a box built to specs in the seat just like it is there. It fit with the seat scooted up a little. The only reason I do this is because I drive people around and I can't have it take up more than one seat. And I take the box out pretty often when I need all the seats. The seat is scooted all thewayback in the position it is in now and the box still does not fully touch the seat.

03 Ford f150

2 Sa8 v2s

Ap 1800d...

Stinger 0 Guage

CA Auto/ Electric Big 3

Xs power d680 in parallel with new group 65 stocker

Soon to come another d680

Rockford Punch 6x8 3 ways in the front, Rockford Punch Pro 6.5s in the back

Soon to come Pioneers all around

Focal Solid 4 Speaker Amp

Kenwood KDC-X896

Memphis Line Driver

My build log: http://www.stevemeadedesigns.com/board/topic/160368-03-f150-king-ranch/

Youtube: https://www.youtube.com/user/LabAudio502?feature=mhee

Link to comment
Share on other sites

thats cool. you might take heat for it. but you do what you gotta do. i had to do the same when i had my ext cab dodge truck

SONY XAV-701HD
RF power 400.4 RF power 1000bd

3 Sundown x8's d2
2004 f150 single cab
2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)
stock batt up fron
BIG 3


http://www.stevemead...-vid-pg-11-922/

http://www.youtube.c.../TheBigmescan74

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 247 Guests (See full list)




×
×
  • Create New...