robby512 Posted July 17, 2014 Report Share Posted July 17, 2014 I have a 2010 ford mustang purchased aftermarket hid's from ddm tunning. Ran them for about three months and one of the ballast went bad so sent it back they replaced it. Now three months later it does it again same ballast so is decide that it's just poor product from them order a new set from sonic electronic, and am getting a similar issue not exactly the same but the issue has been on the passanger side and now with the new kit it won't turn on all tHe way sometimes it will work and sometimes it will. I do have thehid harness/power harness and have it ran like I'm suppose to just out of ideas the only other thing im thinking that might help is Running the plug that runs to the factory hid over to the other side Link to comment Share on other sites More sharing options...
Katt Posted July 18, 2014 Report Share Posted July 18, 2014 Me and a buddy have ordered about 5 sets between us thru ddm. And about 4 or 5 ballasts are junk after a few months. I switched to vvme on ebay. Have had them for a while now and no issues at all. Little bit more but there worth it. Ballasts are bit better too. *06 330i - Sundern x12 - saz-3500* *91 Foxbody V1 S-Trim Notch* Link to comment Share on other sites More sharing options...
robby512 Posted July 19, 2014 Author Report Share Posted July 19, 2014 Yea I got ahold of them again and they told me that any part could be bad so told me to send it back ballast hid harness and bulb back that's why it could Cause it. I know they are not the greatest my truck hid from them has worked fantastic . Thanks for the input I'll have to take a look at that brand Link to comment Share on other sites More sharing options...
donpablo Posted July 19, 2014 Report Share Posted July 19, 2014 Ive been running kensun off amazon for about 4 years in my explorer headlights and fog lights and have not had a single issue 2015 F-150 Platnuim Link to comment Share on other sites More sharing options...
WastedTalent Posted July 20, 2014 Report Share Posted July 20, 2014 trs.com (theretrofitsource) Welcome. Sheena = pedobear Link to comment Share on other sites More sharing options...
White Lightning Posted July 21, 2014 Report Share Posted July 21, 2014 Please install a relay for EACH ballast installed on your vehicle. Those things draw more power from your electrical than you think. They need FAST reaction times from the power source and stock electrical is just not made for it. Also, the least little bit of condensation in the wiring (yes, It will find it's way in there) will cause a ballast to screw up. So you need to have nice solid / heatshrinked conncetions from your relay to your ballast. Hope this helps ... Kenwood / HELIX / Linear Power (For The Love Of Music) / Brutal Sounds / OverKill Electric Co Questions About Sound Quality ?? Try Here ... Sound Quality, What does it REALLY mean ?? SMD SOTM Winner "White Lightning" 1997 GMT400 Chevy Silverado "The Green Dickle" 1994 GMT400 Chevy "Phantom Dually" Randal's 2007 Chevy Avalanche (we haven't named this one yet) Dylan's "Brutal" 17 Chevy Cruze RS Hatch Link to comment Share on other sites More sharing options...
robby512 Posted July 22, 2014 Author Report Share Posted July 22, 2014 Hmm thank you that will be my next try I never thOught of 2 harnesses Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.