Ronnie Karla Emerson Posted August 8, 2014 Report Share Posted August 8, 2014 Hi I have an 2002 Escalade. Im either going with 3 SUNDOWN X15s or 3 Crossfire C7 15s. O really need help design an enclosure. Link to comment Share on other sites More sharing options...
philrab Posted August 8, 2014 Report Share Posted August 8, 2014 Probably help to post max dimensions, rms power to each sub, either desired tuning frequency or type of music listened to if you want ported. 2015 Toyota Tacoma Build Thread 2007 Mazda 3; 5000K HID's, Kenwood Excelon KDC-X997, Infinity Reference 6.5 comps in front and coaxials in the rear doors, JL 320.4 four channel, Rab Designs built ported enclosure with an SA12, Kenwood monoblock, Redline Leater shift boot/e-brake boot/center console cover, JBR short shifter/shifter bushings/rear motor mount. Build Thread 1996 Mazda Miata: Kenwood Excelon HU, Alpine speaker in the doors, Clearwater (miata specific) headrest speakers. 1994 Mazda Protege: Kenwood Excelon HU, Infinity Reference 2 ways all around, 2x RF Punch 10's in ported boxes. Link to comment Share on other sites More sharing options...
RainStryke Posted August 31, 2014 Report Share Posted August 31, 2014 Sundown recommends 4.25sq feet for just 1 of those 15's. I'd expect anywhere from 8-12 square feet is the size of the box you will need. Sundown actually gives you a box design recommendation on their website for 1 and 2 subs of each size. Once you get that, you can use this calculator to decide how long your port is or how to find out the deminsions of the box to get the square feet you require. http://www.the12volt.com/caraudio/boxcalcs.asp I would recommend something that doesn't use as much space. Personally, i'd get two SoundQubed HDC318's if I didn't care about space. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.