Jump to content

Hydraulic Crimper


timc31610

Recommended Posts

Hey guys, I bought a hydraulic crimper off of Amazon and the largest die in the box is a 70mm, which seems to be 1 size too small for my SHCA 1/0 lugs and possibly 3 sizes too small for the 2/0. Where can I buy larger dies?

20140724_215451_zpsokgs4xk9.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Saw a many people just modify the dye a little bit for the 1/0 as for the others not sure.

2000 Ford Focus ZX3

Mods:

Raceland Coilovers

Borla Exhaust

Aftermarket Header

System:

Sony CDX-GT66UPW

Pioneer 6x8's

System Upgrades :

Pioneer MVH-X560BT

2 sets of Rockford Fosgate P1683's

Fi Audio Q 18" D2 ( Currently Own)

DD M1C ( Currently Own)

All SHCA Wires and stuff...

XS Power 4800 ( Stock Replacement)

High Ouput alternator (undecided which company or Amperage.)

Link to comment
Share on other sites

I have that same crimper and I used the 70mm on my sky high 1/0 lugs, no issues.

Avalanche

Alpine Type S comps

Alpine Type S 10''

Alpine MPR-F300

Alpine MRX-M50

Mechamn 270

XS Power d3400s



 

Link to comment
Share on other sites

It does work on the 1/0 although the sides are squeezed a little flat. For my 2/0 I ordered a 16 ton crimper. It has dies up to 300 mm. Hopefully that will do it...lol

Link to comment
Share on other sites

I would do just that but I have had the 10 ton for a couple months, Im past the return timeframe. Never hurts to have two...lol

Sure it does, stick your finger in there and crimp it and you'll never say that again :)

I try to keep all of my appendages out of it!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...