emurra7 Posted January 19, 2015 Report Share Posted January 19, 2015 I am trying to figure out why my amp will go into protect mode on cold starts. After about 10min if I cycle power to the amp it will turn on and work fine. My voltage on cold starts is around 15.0volts and comes down to 14.5 warm. I know these amps are not 16v/18v stable like the bigger amps. There is nothing on dc's site about operating voltage. Just wanna see if anyone else has any experience with this Quote Link to comment Share on other sites More sharing options...
gckless Posted January 19, 2015 Report Share Posted January 19, 2015 I am trying to figure out why my amp will go into protect mode on cold starts. After about 10min if I cycle power to the amp it will turn on and work fine. My voltage on cold starts is around 15.0volts and comes down to 14.5 warm. I know these amps are not 16v/18v stable like the bigger amps. There is nothing on dc's site about operating voltage. Just wanna see if anyone else has any experience with this The 2.0k I used to have did the exact same thing, didn't like ~15.0V or above. Explanation I got from DC was that some amps have different tolerances and it's just the way it is. Quote "Clipping" is the biggest forum boner now. It's like witchcraft... it automatically explains just about everything people don't understand. My build log: http://www.stevemeadedesigns.com/board/topic/200295-gckless-2011-chevrolet-impala/ High resolution photos: Gilbert Kless Photography Link to comment Share on other sites More sharing options...
Raptorman Posted January 19, 2015 Report Share Posted January 19, 2015 (edited) Yup. Just high voltage protect. Don't be worried about it, although that is annoying. Edited January 19, 2015 by Raptorman Quote 1996 GMC Sonoma Four Fi BTL Neo 18's In 2:1 6th Order Bandpass 2 Ampere 5k's @ .5 TEAM FI TEAM #LITHIUMCANTDEMO On 10/20/2013 at 0:37 AM, KillaCam said: Fucking with a Prius driver is like making fun of a disabled kid. Pussies. Link to comment Share on other sites More sharing options...
emurra7 Posted January 19, 2015 Author Report Share Posted January 19, 2015 (edited) Thanks for the help guys. I figured the voltage being too high was the issue. Just sucks that dc set such a low voltage ceiling, Edited January 19, 2015 by emurra7 Quote Link to comment Share on other sites More sharing options...
DavidClark Posted January 20, 2015 Report Share Posted January 20, 2015 Ron? Quote Pioneer 80PRS 4 Scan Speak discovery 4" full rage 2 Ampere Audio 6.5 Comp sets 3 Singer 370 Hairpin's 1 Odyssey g78/34-P1500 6 DieHard Platinum Marine g31 4 XS D3100's DC 175.4 DC 90.4 4 DC 5k's 4 m3 lvl 5 15's Soundrive RCA's Lots of welding lead & SkyHigh Team DC AUDIO Link to comment Share on other sites More sharing options...
WCA Rusty Posted January 21, 2015 Report Share Posted January 21, 2015 3.5k and up will take up to 18 volts (except the 10.0), the smaller amps we dont really see people running high voltage on them Quote DC AUDIO Phone Number 1(855)SPL-DBZZ Built by Competitors, for Competitors. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.