ERICROCKFORD Posted March 31, 2015 Report Share Posted March 31, 2015 Okay so last week and I'm not proud of this I got a pre fab box for my 99 Trans Am now it is ported and they say it is 1.5 cu each side of the box and tuned to 35hz the ports look small is there any thing I can do to mod these port or does any one have any idea on a new design I could build now the ports are 1.5" w x 6"d x 11.5"L and each camber are separated any input be grateful I'm not proud of this box at all by any means I just thought it might be an easy fix for the car thinking about it the more I don't like it. Link to comment Share on other sites More sharing options...
Joe X Posted March 31, 2015 Report Share Posted March 31, 2015 Not much you can do, if you do a larger port, it will take more internal airspace. If you are experiencing severe port noise I would probably close the ports and run those sealed, you can though, do a custom box based on some of the dimensions of the prefab. Link to comment Share on other sites More sharing options...
ERICROCKFORD Posted March 31, 2015 Author Report Share Posted March 31, 2015 Thanks if I build a sealed box should I make it 1 chamber and how mean Cubic feet should I make it I think sundown says 1 cubic feet per sub and should I deduct or add some space for the volume of the woofer thanks for all your help all you guys rock Link to comment Share on other sites More sharing options...
Joe X Posted April 1, 2015 Report Share Posted April 1, 2015 You don't have to build a sealed one just block the ports of the one you have and you are done, this would only be worth doing if you are experiencing severe port noise. Link to comment Share on other sites More sharing options...
ERICROCKFORD Posted April 2, 2015 Author Report Share Posted April 2, 2015 Okay thanks all give it a shot she how it goes Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.