RooTxBeeR Posted April 13, 2015 Report Share Posted April 13, 2015 So I have a friend who wanted me to help him with his ride. Explained to him I am no where near professional and feel I can't charge for my work, not something I can say I will have done by X time. Told him it will be a project we work on together. He had been parting together everything over the colder months and things are starting to finally start coming around in progress. HU is installed, all the wires for the alt + and everything in the back except the runs to the amp are all made, crimped and soldered. SMD VM-1 installed by my buddy, really love the idea he had for it. But more is to come, hopefully getting some start on boxage in the next few weeks. Here is the gear list. Kenwood Double din (don't have model # atm) Sky high car audio 1/0 cable all around Stinger 6k RCA's SMD VM-1 XP3000 Stock batt later to be AGM Undecided Alt DD 9515j DD M4 Big box go boom Here's some snaps of da bish Working on his ride jamming with my tunes That engine bay. I had made a topic earlier and some asked about the engine bay. The alt is hard to reach, but with some removal, access gets a lot easier. Bare gutted trunk and batt in stock location. Putting stock batt on right side, xp3000 on left side. New location Le wire Left switch is parking break ground so you can have DVD's and video going. Right switch is a on/off for the remote wire. My buddy wants the ability to just turn off the sub when he don't want to hear it. Pos from front to back, trunk batt ground, and pos/neg for in between batts Then the VM-1 Then all the wires, all that's left is the box and batteries to be positioned really. RCA's, remote, pos/neg for vm-1 On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
RooTxBeeR Posted April 13, 2015 Author Report Share Posted April 13, 2015 Morning bump, check it out peeps. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
Guest Posted April 13, 2015 Report Share Posted April 13, 2015 cool voltmeter location my sunglasses holder has come down from the bass and broke the clip that holds it up I think Im going to glue it closed nice job! Link to comment Share on other sites More sharing options...
14Fusion Posted April 13, 2015 Report Share Posted April 13, 2015 Decent purple. Not too bright, not too dark. Looks really good on the Maro. Link to comment Share on other sites More sharing options...
Jhunt94 Posted April 13, 2015 Report Share Posted April 13, 2015 Decent purple. Not too bright, not too dark. Looks really good on the Maro. Where do you see a camaro at? Also, looking good so far 2007 Ford F-150 Reg. Cab. Flareside250 Mechman AlternatorSky High Car Audio Big 3 XS Power D3400Rockford Fosgate 1/0 amp kitRockford Fosgate T1500-1bdcpRockford Fosgate T400-4DC Audio Lvl 4 12"Rockford Fosgate Punch 6.5" componentRockford Fosgate Punch 6x8Pioneer AVH-P2300DVDSMD Volt Meter Link to comment Share on other sites More sharing options...
RooTxBeeR Posted April 13, 2015 Author Report Share Posted April 13, 2015 Lol that guy is seeing things. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
jcarter1885 Posted April 13, 2015 Report Share Posted April 13, 2015 Plum Crazy Purple, nice trunk size. What are the usable dimensions? Nav-TV Zen V Audio Interface AudioControl DM-608 (2) Stevens Audio Neo-Comp Full-Size Horns (4) Faital Pro 6PR160 6.5" AudioControl LC-6.1200 (1) Fi Neo 4.7 15" D2 in 3.74 Cubic Feet @ 27.70 Hz Ampere Audio AA3800.1 Odyssey ODP-AGM48 Battery (Starting) Odyssey ODX-AGM31 Battery (Trunk) Big 3 - 2\0 Welding Cable, KnuKonceptz Speaker Wire & 1/0 Power Cable, NVX RCAs, Second Skin (Speaker Tweaker Pads, Damplifier Pro Mat), Diode Dynamics LEDs Link to comment Share on other sites More sharing options...
RooTxBeeR Posted April 13, 2015 Author Report Share Posted April 13, 2015 Plum Crazy Purple, nice trunk size. What are the usable dimensions?Off the top of my head I think it's 28x16x18. I know we have almost 10cuft to use for the box. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
jcarter1885 Posted April 13, 2015 Report Share Posted April 13, 2015 Plum Crazy Purple, nice trunk size. What are the usable dimensions?Off the top of my head I think it's 28x16x18. I know we have almost 10cuft to use for the box. Thanks even though you must of made a typo, gotta be bigger then that. Nav-TV Zen V Audio Interface AudioControl DM-608 (2) Stevens Audio Neo-Comp Full-Size Horns (4) Faital Pro 6PR160 6.5" AudioControl LC-6.1200 (1) Fi Neo 4.7 15" D2 in 3.74 Cubic Feet @ 27.70 Hz Ampere Audio AA3800.1 Odyssey ODP-AGM48 Battery (Starting) Odyssey ODX-AGM31 Battery (Trunk) Big 3 - 2\0 Welding Cable, KnuKonceptz Speaker Wire & 1/0 Power Cable, NVX RCAs, Second Skin (Speaker Tweaker Pads, Damplifier Pro Mat), Diode Dynamics LEDs Link to comment Share on other sites More sharing options...
RooTxBeeR Posted April 13, 2015 Author Report Share Posted April 13, 2015 Plum Crazy Purple, nice trunk size. What are the usable dimensions?Off the top of my head I think it's 28x16x18. I know we have almost 10cuft to use for the box.Thanks even though you must of made a typo, gotta be bigger then that.When I'm home next I'll look at my paper. There's plenty more room than that, especially if you contour down into the wheel well. We only have a single 15 so we don't need all that. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.