sideshow_kustom Posted July 20, 2015 Report Share Posted July 20, 2015 So if you know my Wagon Bis-Kwik I have been redoing my system. I have decided to go forward with what I call Project 6.5! I want to do a COMPLETE build with 6.5's from the sub's to the mid's to the component set up front. I will be running some tweeters but everything else will be 6.5's! This is about where I'm at now. That's 10 Sundown Audio X6.5sw's in a 4th order & my old Suitcase. This is where I am now with the box. Still got some more to do but it's just about all the way done! This is the inside of my current Suitcase it has A Rockford Fosgate T2500-1db, Infinity Reference, & a RF Prime amp, 4 Infinity Kappa 6X9's, ToolMaker Fuse/Ground distribution block and more, All Sky High Car Audio wire as well as some more stuff. Now back to the topic at hand! I am taking a new approach to this suitcase since I've learned so much from the last one! This is most of all that will be going into it! 6 Sundown Neo Pro v2 6.5's along with some tweeters, 2 Scv-2000d's Sax-150.4 and I haven't made up my mind on the Sax-100.4 or the Sae-50.4. It will have 2 fans at the back one pushing air in and the other pulling air out and 2 Cross wind fan's just like the last one did. I want to use these Pac LC-1's instead of the factory bass know Better terminals then the last one on the back side of it for the front stage The Cross wind fans are the same as the last suitcase but the 2 that go on the back to push & pull air in are a higher CFM fan 2 Actuators to open and close the suitcase cause I'm tiered of when I go to show it off I have to climb in the car over my box to open it!!!! I like these so I had to get me one to go in there!!!!!!!!! Something else I learned from the last one the incoming power I will be using Aluminium 1/2 13 bolts for better power transfer! Jon Rabe the owner of Sky High Car Audio located this White 1/0 OFC wire for me just for this build! That was cool as hell of him! Scott Bowman made this SBC Cock Box just for this build as well! It has Inputs on both sides and is configured like I needed it! ToolMaker is working on some more custom stuff for me right now so I should have that stuff by the end of the week! I'm also waiting on some more parts! Check out all my other parts to this build. All the links are in my Signature! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
scooter99 Posted July 20, 2015 Report Share Posted July 20, 2015 Damn, I'm sooooooo in for this!! You're work is stellar! Not a Sundown fan, but I can respect craftsmanship no matter what brand is held in it. I can't wait to see this! Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
sideshow_kustom Posted July 20, 2015 Author Report Share Posted July 20, 2015 Damn, I'm sooooooo in for this!! You're work is stellar! Not a Sundown fan, but I can respect craftsmanship no matter what brand is held in it. I can't wait to see this! Thanks man and I can understand that your not a fan of the equipment but you are of the build! Sometimes that's how it should be. I don't never bash another build no matter if I like what it is or what the builder used, as long as they showed great craftsmanship on the build I'm a detail man! I love to see the fine detail that wasn't necessarily needed to complete the build but gives it a better look! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
scooter99 Posted July 20, 2015 Report Share Posted July 20, 2015 Damn, I'm sooooooo in for this!! You're work is stellar! Not a Sundown fan, but I can respect craftsmanship no matter what brand is held in it. I can't wait to see this! Thanks man and I can understand that your not a fan of the equipment but you are of the build! Sometimes that's how it should be. I don't never bash another build no matter if I like what it is or what the builder used, as long as they showed great craftsmanship on the build I'm a detail man! I love to see the fine detail that wasn't necessarily needed to complete the build but gives it a better look! Oh and you hit all points on the details! You make me mad!! I want to get started on mine so badly, and yet I can't because I'm not ready yet! DAMN YOU! But that's ok, because I have small projects going on to get it started, and I'll live vicariously through you until then. I cannot wait to see you shoehorn some of that gear in the suitcase! I love that type of stuff. Keep it up, big time fan here!! I'll be watching! Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
sideshow_kustom Posted July 20, 2015 Author Report Share Posted July 20, 2015 ToolMaker just sent me the picture of my Custom Fuse/Ground distribution block for the New Suitcase! I love the Clear top on it with Bis-Kwik in it!!!! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
hoit Posted July 21, 2015 Report Share Posted July 21, 2015 Tuned...as always! I'm also following on FB...I feel like I'm spying! Creeper style! 2007 Chevy Aveo Ls sedan 2 Sundown Xv2 on scv4k @ .5 ohm 2 pair RE XXX 6.5 components on sax200.4 @ 2 ohm Big Three, Three runs 1/0 power from front to back, 1 ground front to back Two runs ground from rear bank to chassis XS power d3100 upfront, 3 Odyssey 2150s in bank Singer 220 amp alt Link to comment Share on other sites More sharing options...
sideshow_kustom Posted July 21, 2015 Author Report Share Posted July 21, 2015 Tuned...as always! I'm also following on FB...I feel like I'm spying! Creeper style! LOL It's cool! I've got a hand full of Friends on FB but the Wagon has a few hundreds! LOL Dang car is more popular then me! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
Guest Posted July 21, 2015 Report Share Posted July 21, 2015 wow excellent show quality work awesome pics Link to comment Share on other sites More sharing options...
scooter99 Posted July 21, 2015 Report Share Posted July 21, 2015 Saw this over on facebook, and said it there, but this is beyond legit bro! So very nice!! Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
sideshow_kustom Posted July 23, 2015 Author Report Share Posted July 23, 2015 Not much new to post but I did get the ToolMaker Fuse/Ground distribution block in today so I started laying it out just to see how it will all look. So this is just a little test fit with the 2 Scv-2000d's, Sae-50.4, Distribution block and the SBC box. The SBC box is not staying there it is holding up the distribution block for the pic! LOL This turned out AMAZING!!!!! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.