reedal Posted July 23, 2015 Report Share Posted July 23, 2015 So I a few years back, a guy who worked at Napa auto in my hometown gave me some things for free, from back when he used to have a system. Don't know the time frame, not even sure how old this stuff was. He gave me a 10" in a sealed enclosure that was blown, no brand anywhere on it, but I tossed it. I received two amplifiers from him, one being this 800.2, and the other was also RF, I think it said 1502 or something on the sticker on the bottom, a little bit smaller of a chassis, had the emblem on top that said 1500w. I don't know where it is or what happened to it. I went to Illinois for a year for the navy, come back and my shits all fucked up. Got a couple Rockford 1.0f caps and wiring from him too. Now for this amp. It's in terrible condition. I pulled it from the floorboard of my cousins 1980 K1500, and it was in nowhere near this bad of shape before. There used to be rockford's label on the bottom saying what model/power rating it was. RCA center pin stuck in the left input A little dusty inside the bottom cover And now the good stuff (literally the only good stuff left with this amp) Whole board Cosmetically it's not that great. Funcionality... I'll see if I have small enough wire for the dual 8ga power and ground inputs. But it's going to get cleaned up. It really pissed me off to find it like this. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.