sideshow_kustom Posted January 24, 2016 Report Share Posted January 24, 2016 Ever since I did the system in "Bis-Kwik" with the Sundown X6.5's my wife has been asking for a small system in her Nissan Versa Hatch Back. I got her 2 X6.5's and started collecting equipment for her! So I hit my Buddy up Jared Gibson and told him I wanted to do a T-Line build in her car with 2 X6.5's, She wanted something very musical so I felt like this was the way to go. He got some help with the design of it. I kept collecting! I got a Rockford Fosgate T400-2 for the sub's and a T400-4 for the door speakers Sky High wire kit and Rca's As well as Sky High 9 wire Xs Power D3400 for under the hood and Xp750 for the rear I wanted to keep the factory Head Unit in her car cause of all the features it already done. BUT I did not want to cut the factory wiring harness so I bought a Audio Control Dq-61 processor and this is what the 9 wire was for I ordered male & female plugs for the factory harness so I could tap into it Time to start soldering! Her factory speakers was JUNK but I did like the way they was mounted so I decided to cut up the factory speaker and use the ring! I decided to run the Sundown Sa-6.5cx Coaxial's in the doors but make them bolt straight up and plug directly into the factory harness! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
sideshow_kustom Posted January 24, 2016 Author Report Share Posted January 24, 2016 Now let's get back to that box build! Dust a flying! Starting to look like something!!! The cut out on the right is where the XP750 battery will end up going Made some test cuts for the front baffle There will be a plexy-glass baffle behind the front one with LED's in it. That's where the name Black Widow came from! It will be Black with Red LED's Getting closer & closer!!! Still have to smooth all the kerf's and paint everything, FAR from being done! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
Smoove Posted January 24, 2016 Report Share Posted January 24, 2016 that box is looking great. 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
CleanSierra Posted January 24, 2016 Report Share Posted January 24, 2016 Hunter does some great design work. I'd trust him to design me anything. Good looking work as always Ronnie. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
MrSkippyJ Posted January 24, 2016 Report Share Posted January 24, 2016 Question for the dumb (me), why all the extra I used space built into the box? F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
afrakes Posted January 24, 2016 Report Share Posted January 24, 2016 I think he said he's gunna put a battery in there?? Vehicle: 2014 GMC Sierra 2500HD WT Head Unit: Pioneer DEH- Mids/Highs: Focal Integration ISC 165’s (front) Subs/Amps: TBD Link to comment Share on other sites More sharing options...
sideshow_kustom Posted January 24, 2016 Author Report Share Posted January 24, 2016 Question for the dumb (me), why all the extra I used space built into the box? Trust me that's not a dumb question cause a BUNCH of people have asked that! To keep the port length and width correct in the required foot print I had to work with this is how it ended up. So I never see wasted space I always see room to hide stuff! LOL Anyhow I am making the large empty space a battery compartment as well as all my wires will come through here so there will be no wires seen on the outside of the box. We are building a amp rack on top of the box as well. It will make more sense when we are further along on the box build! Drive In Theater Speaker Build http://www.stevemead...-speaker-build/ Suitcase Build http://www.stevemead...ld-in-bis-kwik/ Coleman Cooler Build http://www.stevemead...ld-in-bis-kwik/ X10 Box Build http://www.stevemead...under-bis-kwik/ Complete Build Log On Bis-Kwik http://www.stevemead...13-wagon-build/ NEW SUB'S 8 SundownAudio X6.5sw Build http://www.stevemeadedesigns.com/board/topic/197034-new-wagon-build/ Link to comment Share on other sites More sharing options...
bsneon98 Posted January 25, 2016 Report Share Posted January 25, 2016 badass! love me some kerfs Build Log: http://www.stevemeadedesigns.com/board/topic/152954-1998-plymouth-neon-updates/ Link to comment Share on other sites More sharing options...
MrSkippyJ Posted January 25, 2016 Report Share Posted January 25, 2016 That does make sense, probably should have read everything rather than just look at pictures!! Looks awesome! F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
starkey814 Posted February 2, 2016 Report Share Posted February 2, 2016 I know I'm late to the party but I have to be tuned in for this especially after following BisKwik. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.