Jump to content

4 8" Infinity reference, Custom Folded Horn, iNuke1000dsp *With Pics now!*


Recommended Posts

Hey everyone, this is my first time making my own home theater sub. I've received a lot of help from you guys so I figured the least I could do was make a build thread. I'm at work right now so I can't post the pictures, but I'm excited so I figured I'd start the thread anyway. The cabinet is is going to be laid on it's side and used as a coffee table (exterior decorations to be determined by the ol' ball n chain and added later by yours truly). Port facing away from seating, fairly centrally located.

Link to comment
Share on other sites

  • Replies 54
  • Created
  • Last Reply

as promised, here's the pictures so far!

The equipment, 4 Infinity Reference 8" 4 ohm svc subs and a Behringer iNuke1000dsp

20160103_125413.jpg

got my birch pre-cuts so i could get them in the car

20160128_161214.jpg

going to work

20160130_121112.jpg

first initial layout, making sure my cuts were good

IMG_20160130_161645.jpg

different angle

20160130_151450.jpg

making sure i had enough clamps

20160130_152554.jpg

got to work with the kreg and titebond3

20160131_135858.jpg

3 sides up, glued and screwed

20160131_142037.jpg

everything glued and screwed save for the sub panel (you'll notice 3 of the holes got burnt and one didnt, well guess when i changed my saw blade)

20160131_171057.jpg

sub mounting panel glued, screwed, and clamped in place

20160131_182343.jpg

that's where i'm at right now. about to start getting all the internal bracing cut and glued, then it's time to paint the inside, do the wiring, mount the subs, and close her up.

Link to comment
Share on other sites

Wish I could hear it ...

Kenwood / HELIX / Linear Power (For The Love Of Music) / Brutal Sounds / OverKill Electric Co 

Questions About Sound Quality ?? Try Here ... Sound Quality, What does it REALLY mean ?? 

SMD SOTM Winner "White Lightning" 1997 GMT400 Chevy Silverado   

"The Green Dickle" 1994 GMT400 Chevy "Phantom Dually"   

Randal's 2007 Chevy Avalanche (we haven't named this one yet)

Dylan's "Brutal" 17 Chevy Cruze RS Hatch                         

Link to comment
Share on other sites

so since i posted the last pics i've measured, cut and installed the bracing and gave the port mouth a decent coat of black (im going to make a magnetic port cover fabric or something)

20160201_180720.jpg

this gives a pretty good idea of how big the port mouth is (note my hands arent very small)

20160201_181208.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 237 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...