Bayuk89 Posted July 23, 2016 Report Share Posted July 23, 2016 Cant wait to install it tomorrow Link to comment Share on other sites More sharing options...
Bayuk89 Posted July 23, 2016 Author Report Share Posted July 23, 2016 This amp is freaking huge....well compaired to my rockville M4. I will do a side by side pic tomorrow. Its got some weight to it, shipping weight was 25 pounds. Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted July 23, 2016 Report Share Posted July 23, 2016 Congrats on the purchase. Did you get those 18s in a box yet? Put up some pictures when you get the amp in. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted July 23, 2016 Report Share Posted July 23, 2016 You might want to wire at a higher ohm load, lol. Poor subs are about to take a beating. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Bayuk89 Posted July 23, 2016 Author Report Share Posted July 23, 2016 This how it looks right now... Tomorrow im gonna pull the box out and paint the bottom all black instead of the white accents and install the new amp. Also gonna glue some wood across my back wall ( too much vibration and flex ) Also got some oversized 10ga kunkonceptz OFC wire coming in the mail.. Link to comment Share on other sites More sharing options...
Bayuk89 Posted July 23, 2016 Author Report Share Posted July 23, 2016 Broke audio addict Yea i can wire my D4 to 4 ohm in series parallel... Thought about just tuning amp with 0 dB with my DD-1 to "be nice" to them... I know in stock form these SA-18's wont survive the extra power at full tilt for very long. Link to comment Share on other sites More sharing options...
Bayuk89 Posted July 23, 2016 Author Report Share Posted July 23, 2016 Here is a side by side of my rockville and twisted sounds. Gonna be a LONG day, i will post pictures tonight of how far i get. Link to comment Share on other sites More sharing options...
Bayuk89 Posted July 24, 2016 Author Report Share Posted July 24, 2016 I had to move my audison over like 6 inches so the TS would fit Upgraded my wiring from 12ga OFC SHCA (left) to 10 ga OFC kunkonceptz (right) Link to comment Share on other sites More sharing options...
Bayuk89 Posted July 24, 2016 Author Report Share Posted July 24, 2016 First tuned with DD-1 @ 0 dB and didnt notice any difference in sound output compared to my rockville tuned at -5 dB... Retuned to -5 dB and it sounds just a tiny bit louder. Thought going from a 1500 watt chinese board to a 3k plus korean board amp would be alot louder... All in all im happy. I will run it for a bit and see how the subs like the tune, might tune back to 0 dB idk.... Link to comment Share on other sites More sharing options...
ToNasty Posted July 24, 2016 Report Share Posted July 24, 2016 So you want to sell me the 18s in a few weeks is what you're saying? ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.