Karkov Posted July 30, 2016 Report Share Posted July 30, 2016 Does anyone have any experience with these? Anyone who has heard them would you care to give a review? http://www.lanzar.com/sku/OPTI8HPRO4/Opti-Drive-Pro-8-High-Power-4-Ohm-Mid-Bass-with-Compression-Horn-Tweeter-Full-Range-Speaker 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted July 30, 2016 Report Share Posted July 30, 2016 I have a pair of the ten inch version in my DJ setup. I have them running on two channels of a Berringer inuke 6000 four channel. They get loud and don't sound bad doing it. I also run 4 Pyle 15s in sealed boxes with them. Our "Block" party can be heard two blocks away. I have had several compliments on how clear they sound and I think they sound good. I have a thread on them but for some reason my tablet can't paste the link. Its something like "Loudest coax speaker?" in the SPL section. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Karkov Posted July 30, 2016 Author Report Share Posted July 30, 2016 wow you have a lot of power going to them 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted July 30, 2016 Report Share Posted July 30, 2016 They are holding up so far. They are usually playing all afternoon and half the night on Fridays and Saturdays. I tried to get a pair of eight inch from the same place to put in my truck. Their listing on eBay was messed up and they sent me 6x9s instead. It was such a run-around trying to return them,i haven't tried to re order yet. I just got paid so maybe I will do that today. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted July 30, 2016 Report Share Posted July 30, 2016 Almost forgot to mention, the magnet is huge on the 10. Bigger than a normal mid. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Karkov Posted July 31, 2016 Author Report Share Posted July 31, 2016 Thanks, I was gonna go 8's but i actually think i might go 10's. (4 total) I am just gonna run them off a RF amp at 4 ohm so prolly not fully powered but should be safe at least (Everything always set with DD-1+ and CC-1). Basically these will be on a switch for me so they won't be on all the time but when it's time to demo whether for just a song or a whole day i want these things to be loud and clear. 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted July 31, 2016 Report Share Posted July 31, 2016 I am going to put mine on a fader so I can dial them in and out and have something to play with. Are you going to put the 4 10s in your doors? Maybe you could biamp them with the 4 channel like two drivers per channel. That way you could adjust the tweeter level and mid level independently. Might give you some flexibility even though they sound fairly well balanced to begin with. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Karkov Posted August 1, 2016 Author Report Share Posted August 1, 2016 I am going to put mine on a fader so I can dial them in and out and have something to play with. Are you going to put the 4 10s in your doors? Maybe you could biamp them with the 4 channel like two drivers per channel. That way you could adjust the tweeter level and mid level independently. Might give you some flexibility even though they sound fairly well balanced to begin with. Not in doors no, rear fill only for demos, I want them on a switch so not on all the time. 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.