Dill Posted December 1, 2016 Report Share Posted December 1, 2016 Just wondering if I could get some help with an enclosure that I would like to build. Starting off, will admit that I am fairly new to building boxes and need lots of help. Currently I have two Rockford Fosgate P3's powered by a fosgate prime 1200 watt in a prefab box Listen to mostly rap, g-eazy, rae sremmurd, 21 savage, that kinda of stuff. Max dimensions that I could build is H- 17in W- 37 in D- 20 in Wondering what would be the best tuning for the subs and how I would achieve this with an aero port? And what dimension would work best for building this box? Link to comment Share on other sites More sharing options...
Joe X Posted December 2, 2016 Report Share Posted December 2, 2016 The following is a sample box for your reference, it's for a trunk car and uses a very easily implemented slot port (likely easier than with going with a round port), it's tuned lower for rap, power: to sub rated, amp subsonic filter to 28Hz, minimum port clearance 3 1/2", figure is just an assembly guide: Link to comment Share on other sites More sharing options...
bcbrassard Posted December 2, 2016 Report Share Posted December 2, 2016 OP, Joe X always has good designs. Build it and you will be happy. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.