Not sure if this is the right place for it but i just wanted to say thanks to jeremy and forest for helping me out. One of my mids blew and i wasnt even worried about being charged for one speaker... however they helped me out and within 2 days had an entire new set. Your customer support is amazing, thats why i stick with RF, thanks guys.
Page 1 of 1
Thanks Rf
#3
Posted 16 March 2009 - 06:36 PM
Yeh I have had good experiences with them....one time the amp cover screws were missing gave them a call and I had them in 3 days....guy stayed on the phone with me while he dug around and found some and sent them for free.....I know they are just screws but I couldn't find the exact ones I needed in my hardware store and they sent me them for free....
Vehicle: 1997 S10 Blazer 4dr 4X4
Exterior: Rear End Bagged, Black Grill, 5000K Hid Low & Fogs
Amplifiers: Rockford Fosgate T8004 & Two T10001bd
Batteries: 2 Stinger SPV35, Kinetik HC2400
Electrical: Big 3, DC Power 270amp Alternator w/ MLA at 15.3v
Enclosure: 8.2 ft³ @ 38Hz 134sq.in. of port (16.4sq.in. per cube)
Headunit: Pioneer DEH-P5000UB w/ 80G iPod
Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)
Subwoofers: 2 15" Fi BL Fully Loaded
Wire: All 1/0g Kicker Hyperflex
Future Upgrades: Viper Alarm & 24" Rims & Tires...



Colin - 1HVYHTR, on Sep 26 2009, 10:03 PM, said:
Your port was like: "Gimme Yo Sweata'!!! NOM NOM NOM"
czman30, on Jan 27 2010, 04:00 PM, said:
yea but my bro's a networking spaceshilist
______________________________
My YouTube Videos
My Fiberglass A-Pillar Build
My "Seamless" Looking Box Build
My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)
My Stealth 8" Fiberglass Build (for '05 TrailBlazer)
My feedback/references...
#5
Posted 16 March 2009 - 06:39 PM
Ya I better put a shout out to Forrest. For some reason he is usually the guy I'm dealing with by coincidence.
Thanks for always takeing the time for me man,
Jon S aka ISO
Thanks for always takeing the time for me man,
Jon S aka ISO
Isobaric - Refers to the practice of coupling two drivers together to make them act as one.
A cap is only good if you have 0 voltage loss and want to clean up the power at the peaks of the ripples..
Boon: Don't get hung up on specs like xmax. It's probably the third-most lied about spec, after power handling and sensitivity.
"Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go."
was the fact I won't get to find out whats going to happen tomorrow if I die today.
Insanity: doing the same thing over and over again and expecting different results.
The Destruction of a person builds character.
Hoo-Bangin' on the transformers
Getting my stalk on walk on "Skip skip"
Sack jacking purse snatching hoo-banging till I die
A cap is only good if you have 0 voltage loss and want to clean up the power at the peaks of the ripples..
Boon: Don't get hung up on specs like xmax. It's probably the third-most lied about spec, after power handling and sensitivity.
"Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go."
was the fact I won't get to find out whats going to happen tomorrow if I die today.
Insanity: doing the same thing over and over again and expecting different results.
The Destruction of a person builds character.
Hoo-Bangin' on the transformers
Getting my stalk on walk on "Skip skip"
Sack jacking purse snatching hoo-banging till I die
Page 1 of 1

Sign In
Register
Help



















Add Reply


MultiQuote



