[Blazerslapp]

Think that would be good atleast sound really good? and would it be bad to run the l7's in parrael? gonna be running 0 gauge and another batt in the back




Thanks, Chris

[ChiTownTBird312]

i could be getting this completely wrong....but if you wired the subs in parallel wouldnt you only need one amp? or can you run more than one amp to subs wired in parallel?

[Blazerslapp]

Blazerslapp, on Apr 19 2009, 07:08 PM, said:

Think that would be good atleast sound really good? and would it be bad to run the l7's in parrael? gonna be running 0 gauge and another batt in the back




Thanks, Chris

Not to sure still new to car audio.. pretty much wanting to run each amp to 1 ohm how would i wire them? so that would be 1000ish watts to each sub..im going to be running 2 amps..sorry i was unclear

[emperorjj1]

need to know the impedance of the subs first

[ben29555]

do the l7's have d2 or d4 voice coils?

[loganuf]

emperorjj1, on Apr 19 2009, 06:35 PM, said:

need to know the impedance of the subs first

well in order to do it the way he wants the subs would have to be dual 2 ohm, each one wired down to a 1 ohm load. if u do this though i recommend getting something like a maxxlink so that u can garuntee each of your subs are in sync with each other. If your stuck on getting two amps than this is the way to go, but it wold be a lot easier to get the t2000.1, and get two dual 4 ohm subs and wire them down to a one ohm load together so that you get 1000 rms to each sub from just one amp.

[ChiTownTBird312]

loganuf, on Apr 19 2009, 07:39 PM, said:

well in order to do it the way he wants the subs would have to be dual 2 ohm, each one wired down to a 1 ohm load. if u do this though i recommend getting something like a maxxlink so that u can garuntee each of your subs are in sync with each other. If your stuck on getting two amps than this is the way to go, but it wold be a lot easier to get the t2000.1, and get two dual 4 ohm subs and wire them down to a one ohm load together so that you get 1000 rms to each sub from just one amp.

not word for word...but thats pretty much what i was thinking.


just get a 2k watt amp and wire them in parallel that way the are both gettin the power you want.

This post has been edited by ChiTownTBird312: 19 April 2009 - 07:16 PM