Cj Kumz

I didn't was just letting the other guy know 2 15s could fit unless I disturb the backseat.

Yes I'm quite set on sundown. And have around 800 for the subs. Thanks

How much the subs will move depends on a lot of things like how close the song is to tuning, the box size, port size, etc. So simply watching a video isn't evidence enough that a 6500w amp will fail to power two 2500w subs. But if you getting another sub you will need more power as you suggest

So due to cone area two 12s is my best bet in that space. I will look into 2 x12s or 2 zv3 12s(but leaning towards the Xs due to xmax . I know for sure 2 zv4s will be underpowered by the 3500 lol so I wouldn't bother trying. I'm trying to do a full sundown setup. Will be getting my wiring soon too..

Ok so I did abit of some research over the zv3s and sounds like a good plan. The issue is that after subwoofer displacements (0.48ft3) and port volume of close to 1.5ft3 will leave me with less than 5 cubes net. So seems two 15s is out of the question

I have never heard the zv3s before. Are they good low end monsters like the Xs and zv4s?

Hey people. With 7 cubes gross. What subs do you guys suggest would give best output for daily on that kinda power. Was debating between 2 x12s or 1 zv4 15. Thanks

Your build will depend on how well built you box is. The reason is impedance rise. A 2000w amp will underpower a zv4 unless you have completely no rise. So perfect sub to match that amp would be the X series. Though you could also get the zv4 then work on building an efficient box. So if you gat space get the zv4

I hear they are slightly more efficient but haven't proved yet. Or you could just save a it more and get the scv 2000

Personally I like mine at around 65 hz

Yes I have. There officially no dealers in south africa. Bryan from sundown has just replied to my email with distributor info. Thnks for the reply though

Hey people. Anyone here have a contact person for sundown products in South Africa??

Sorry triple post

Yah sounds ok but personally I would do a max of about 5.5 cubes with around 90 sq inches of port

Yah sounds ok but personally I would do a max of about 5.5 cubes with around 90 sq inches of port