bmwking

@aburger Spectrum i got in trouble for tagging myself, so now I tagged you

@Thatcarkidd Spectrum

@bmwking Spectrum

lol my pleasure, happy to help motivate

nice work! always nice to have that revelation and it works!

when using a DD1 on a 4 channel amp you want to hook the positive lead to the positive of channel 1 and the negative to the negative terminal of channel 2, effectively bridging the 2 channels to the DD1, that way you won't have a disparity between them, itll allow you to set them both equally to your max clean volume. as far as the other equipment you're running (maestro, dsr1) I don't have any experience with those, hopefully someone who does can chime in

i've found when setting at the amp it makes it easier to put the DD1 leads in the speaker outputs and actually tighten the output terminals down to hold the leads in place. just my $0.02 that frees up your hands to adjust gain and volume on the HU without losing your output

try reversing the wires on one side of the box, Hook positive to positive and negative to negative on one side of the box, and positive to negative and negative to positive on the other side of the box. many times with a bandpass enclosure of this sort it will increase output by putting the woofers in a push-pull configuration. also be aware that the amplifier you are using is a home theater amplifier and is sending a full range signal to your woofer, not a properly crossed over bass only signal. for best results try to find a subwoofer amplifier (search for a plate style home theater subwoofer amplifier) to get the best out of your subs. also also, this enclosure is not going to be the best choice for a home theater setup, but if it makes you happy, have fun with it

don't watch it too close, good ol forum jesus up there resurrected a 9 year old thread

drawing is on the 3rd you dolt.

can i get a white secondskin sticker tossed in on that order? prettty please?

Yep, that one got me, thanks!!

nice! thanks for the chance!