Davo2378

im not selling anything sorry ill learn to read the rules of the for sale section.

Oh ok that helps out alot thanks you guys

ok thanks, UnderLoK and FaTbOy911

ok I got it, and I already have the big 3 done so I just need to run the 1/0 to the back from the front battery. But your sure I dont need an isolator

to the rear from the front battery NOT the alternator

Ok so I have a brand new 3 month old Everstart Maxx 75N up front and I'm going to put two XS D1200 in the back. My question is do I need a battery isolator? And my other question is do I hook my 1/0 wire to the front battery or to the alternator?

the box is 7.5ft^3 right now, thats why i wanna cut 1" out of the top to make it 7ft^3

Yeah i think i'm going to give it a try

Yeah a 97 Blazer

what dose everyone else think

it should be fine i think, By taking the inch out of the box that makes the box 7ft^3 net on the inside, so then i put 7 in the box for DESIRED NET VOLUME on the calulater, then chang the port size on the calulator and it should think thats its useing just thicker MDF wouldent it and not mess with anything because the inside of the box is not changing it's always going to be 7

yeah but cuting that inch out of the top will change the volume of the box

OK as of right now my box this like this. And now I wanna do this to it, if I take 1" out of the top and make it 18" tall it will make the box 7ft^3 net, and now i take 3/4" mdf and put is on the inside of the port and make the port 4.5H by 18.5W and keep it 16.5D It should tune it to 35Hz. The red is the new MDF in the port can I do this and will it work?!?!?

i'm starting to think i dont have the room for 2 15's in the blazer

New box design, dose this seem better?