hzsogood
Members-
Posts
319 -
Joined
-
Last visited
About hzsogood
Profile Information
-
Gender
Male
hzsogood's Achievements
Newbie (1/14)
5
Reputation
-
Need an alternator for a 2005 SRT-4
hzsogood replied to hzsogood's topic in MechMan Alternators and 12v Accessories
Email sent -
Need an alternator for a 2005 SRT-4
hzsogood replied to hzsogood's topic in MechMan Alternators and 12v Accessories
Thanks guys. Taking a look at everything I might just do the big 3 with a good xs battery from mechman. As the srt4 alts seem to be somewhat descent. Couple questions. What's a direct replacement battery for an 05 srt4? 1200, 1400? ( dont flame me for this one , haha ) when your bolting your new wires to the chassis, I see using dielectric grease is pretty common. But once its all bolted down , can you spray a plastidip, or rubberized coating over it to further prevent any issues , and completely seal it upon top, and underneath? -
Need an alternator for a 2005 SRT-4
hzsogood replied to hzsogood's topic in MechMan Alternators and 12v Accessories
General big 3 thread? -
Need an alternator for a 2005 SRT-4
hzsogood replied to hzsogood's topic in MechMan Alternators and 12v Accessories
Thank you sir!... yea, its just an aq1200d, but seeing as how the car will be raced, i just didnt want too small of a battery/alt combo .. If I put the battery in the trunk it will be a pita and cause a issue at the track.. Im sure mechman has big 3 diagrams for the wiring on my car, and I would love to see it as electronics is not my specialty lol -
sub is amazing, I cant help but to add another.... amp seems to be holding voltage around 14, which puts be at a descent power setup... 2 sa-8s @ 1000 rms off a aq1200d .. This sub is noting less than amazing , and even tho I'm behind the times seeing as the v3 is on its way out.. I just want to thank Sundown for all the amazing mini subs over the years!
-
Got all the pieces cut for the box above this post. Only thing of concern is the depth of the sub... the depth of the box is only 7 inches. The mounting depth of the sub is 6 5/8... which only leaves about 1/2 between the back of the box and the magnet.. is that OK, or should I add a second baffle to raise it up another 3/4"?
-
Can you take a quick look at this enclosure design/. Its going in a trans am and am limited with space http://www.stevemeadedesigns.com/board/topic/191577-need-2-sa-8s-for-01-trans-am-questions-and-enclosure-options/
-
Yea I have no room to do aeros, from what I can see, so slot port it is.. The problem is, when I plot out the box with the Torres tuning calculator, my port ratio is 1:7.67, which seems high? port area is 17.25, port area per foot is 17.08. and thats exactly .95 cubic feet net after sub displacement.. Is that to big of an enclosure?