Jump to content

As-21

Members
  • Posts

    89
  • Joined

  • Last visited

About As-21

Profile Information

  • Gender
    Male

As-21's Achievements

Newbie

Newbie (1/14)

7

Reputation

  1. Thanks for the replay. I have a problem i think with charging the d5100. The charging LED flashes. It turn on and off. I read 10.8 volts on it when its disconcted.
  2. I just got the IntelliCHArGer 1005E from my friend to refresh my XS Power batteries. I got 6500 3100 and 5100. When i charged the D6500 by it self i noticed that it skipped the stage 1 of the charging and went to stage 2. I could see that because i set the charge rate to 15A and the meter on the IntelliCHArGer when up to 15A and went down 2 sec after to a bit above 0AMP . Is it OK ? Also i want to know on how much charge rate should i charge this batteries got 5A 15A 20A ? I set it to 15A for now.
  3. so when is the level 5 Ts parameters will be released ?
  4. here is the grey color on the coil its about inch width and 2 or 3 lanes of the coil very straight and square shape: what you guys think ? where this coming from ?
  5. i installed the sub inverted and played again on the area that i hear the noise the loudest i can see a straight Square shaped of gray paint on the voice coil i couldn't take a picture off it because i can see it only when i play a track. it is where one of the leads going to the coil not the same lead as before its different lead is it out of align ? is it hard to fix that kind of problem ?
  6. this is a video you can hear what i am talking about: the buzzing sound isn't from a bad recording that what i hear when the subs operates http://youtu.be/IcCz63rBEpI also i noticed that the cone and spider connecting place on one side of the sub is dry or failed apart could it be the reason ? here is a picture of the dry side: and here the other side for compression: this picture is for the leads mark couldn't get clear picture off it.
  7. this are the specs 1.5 cuft net. 16 inch^2 per cubic feet tuned to 34hz, here is the Google sketch file if it helps. http://speedy.sh/VwDKw/LVL5-DRFAT-1.skp just click on download above. ill try to upload a video so you guys can hear it too, this is my setup: Hertz HSK 165XL Celestra FA475x DC Audio 3.5K DC Audio level 5 12 inch XS Power 6500 on the front. XS Power 3100 on the back. Knukonceptz 0 gauge an 10 gauge OFC wire. 110 AMP alternator
  8. i noticed today that my sub making a rattling sound and hit noise when i crack the volume up. i didn't touched the gain for a while and the noises come when i am on high volume. it wast like this before i must say. so i took the sub from the box to see i i can hear from where this noise is coming. didn't hear nothing special i noticed that one of the leads is kinda touching the cone and there is leads marks on the cone. when i play the sub all volume up on free air i don't hear hitting sound only low rattling sound when i put it back i can hear something hitting or hitting sound and rattling on a bit low volume. Ive also checked the cooling hole on the bottom if there is a FOD in it didn't find nothing and the sub looks aligned. what can it be ? is it possible the spider lost there stiffness and i am hitting now the XMAS ? Or is it the box fault ? too much port area ? or the port area is too little ?
  9. I used to ride . Thanks to all i did only a half because i went out of stickers took me at least 4 hour to do this but its worth it. Hit me up with nice dc audio sticker i don't have one
  10. I want to get bigger and louder form the ported box i got. I got 1.5 cuft after displacement 16^2 per cubic feet tuned to 34Hz. I want to build a louder daily box then what i got. What are the specs i got to do for 4th order ? is it recommended to a sub like i got ? I got 5.6 cuft for the new box.
  11. Btw Rusty when you gonna poblish t/s info for the level 5. Also i want to build a 4th order box for my sub what you recommend?
×
×
  • Create New...