garton05

I was looking at harbor freight too but i was wondering if it would be strong enought to drill the treads out on my block to install my second alt.

I need a good drill that will drill out my treads to intall my dual alt kit. Its gotta fit inbetweeen my radatior and my engine. Where you guys buy ur tools at.

I'm still not catching on all the way. What about a diagram of what your meaning.

It's in a 2002 Cadillac Escalade.

I have the stock alternator and DC power 230amp alternator. What do you mean by run them to my system. I was planing on runing both alternators thru my optima battery up front to my XS power d3100 in back then to my 2 AQ2200's. What you think?

Do i just wire it so both alt are on my first battery or one alt per battery. How's this work?

How has this head held up for you. I have had nothing but problems with it.

Frequency Response . . . . . . . . . . . . . . . . . .20Hz to 80Hz Nominal Impedance per Coil . . . . . . . . . . . . . . . . .4 Ohms Nominal Impedance per Driver . . . . . . . . . . . .2 or 8 Ohms Peak Power Handling . . . . . . . . . . . . . . . . . . . .2000 Watts RMS Power Handling . . . . . . . . . . . . . . . . . . . .1200 Watts

Optima Yellow Tops work well, although it's always better to go with the best, and you'll pay for it too, but if your not on a budget, definetly go with XS power, get the largest you can afford (leave room for later upgrades) and put it in the trunk, then run it in parallel to your starter batter, with AT LEAST 4 gauge wire, definitely try for 0 gauge. The other option is replacing your starter battery with a compatible sized battery from xs or optima, IF u can find one that will fit AND meet your power requirements. And DEFINETLY DO THE BIG 3. If you don't know what that is, everyone will be happy to explain. As for an amp, Soundstream has the DTR series, they're affordable and they're durable. No matter what amp you choose, keep in mind that manufactures will over rate there amps, so unless someone on here tells you an amp is ok, ALWAYS check to see if it is CEA compliant. it will be on the amps data sheet or on the manufacturer's website. The big three is Big battery up front witch i have a optima red top, battery in back and what is the third? Ya i know amps are always overrated thats why its taken so long to buy amps. i got the money gotta find the legit one's. thanks

Ya I'v never heard of audioque either. they look like nice heavy amps. Will a optima battery work or should i buy one of them XS batterys. How big of a battery would i need for two aq2200d amps. Do you think that two aq2200d is to much amp?

my amp i had in there was a cheap 150 dollar one off ebay so its not pushing the subs at all! Is there any place's where i can see how to hook the second battery up? I know good amps are not cheap so i wanna get it right this time!

I'v got a 2002 escalade with a alpine IVA-W205 deck with two phoenix gold elite's in a sealed box. The subs take 1200 watts apeice of continuous power handling power. What are some good amp's that will stand the time? Also i had a cheap amp hooked up and my lights were deming even tho i have a cap. How else can i solve that problem? just looking to finsh thing off right!