Jump to content

Rev. Wrath

Members
  • Posts

    182
  • Joined

  • Last visited

About Rev. Wrath

Profile Information

  • Gender
    Male
  • Location
    Oklahoma

Rev. Wrath's Achievements

Newbie

Newbie (1/14)

15

Reputation

  1. I'm Running my X-12 on 2k no problem. 2.75 ft.^3 tuned to 32.
  2. J.W. Blue is amazing. J.W Gold is also really good, and at ~$75 a bottle you really can't go wrong. My go-to is also black.
  3. This box sounds really good on ~600w. I built it for one of my SA-8s and haven't found a need to build another, as I usually do. Also, Welcome to the forum!!! EDIT: Also built the 4th box in post #26 for my other SA-8, sounds pretty good as well.
  4. I bought 2 Fosgate T1500bdcps. Fast shipping, great packaging and everything was there. A+ seller here.
  5. 4.76 is WAAAYYYY too high for woofer displacement. No way they take up 1.19 each. EDIT: I can't find exactly how much they displace each, but I'd say it's more in the .15-.20 range.
  6. I don't think I used an orange wire from the TR7 or the head unit. I DO remember there is a six pin molex connector on the back of the IXA-W404 that has I believe 2 wires coming out of it and I wired mine to that. IIRC the wire I used was the one marked REM. IN and I want to say it was white with a brown stripe or brown with a white stripe. Sorry, I hope I'm not confusing you more lol. It's been a while since I hooked it up and it's installed right now. I know this for sure, Black from the TR7 goes to Black on the vehicle adapter harness, Red on the TR7 goes to either Red or Yellow on the vehicle adapter harness (The way I understand is it doesn't matter which) EDIT because it wouldn't let me finish typing. Past that, I'd only be guessing. I just spliced the wires together exactly how the little orange (or yellow) card that came with it told me to. Did yours come with that card? I can't find mine right now, but mine was exact instructions on how to wire to an Alpine HU. Just wire it up according to that, and then hook up the power pack after that's all taken care of and you should be golden. If not, you may have a faulty TR7.
  7. Are you talking about the KTP-445 power pack? I had this same EXACT setup on my explorer. The TR7 should not wire into the power pack at all. Just the head unit. Wire up the TR7 to the head unit per the instructions without even having the power pack installed then when all wires are soldered/crimped, pull out the black plug and run the power pack in-line. Man I hope this makes sense. Lol. EDIT: Also, I don't remember hooking up that many wires on mine. I want to say it was only three wires from the TR7, but I could be wrong. its been a while. I know they come programmed for alpine head units so I hooked mine up like the instructions said.
  8. If you're planning on selling it either way, I would just leave it like it is. Someone that recones subs might want to pull the old cone out themselves. Or you can say you'll pull the old one out if they would rather have it that way.
  9. Door panels look pretty nice. And did I see you painted the wheels black?
  10. Some really nice work you did there. I especially like the aero port on the first box.
  11. It's kind of hard to tell from that pic, but it doesn't look like a Double Din will fit in there. As far as pulling it apart, you might want to invest in a repair manual. Pulling apart the interior, you will use it more than you think.
×
×
  • Create New...