hayabusaboi06

I have 3 orion HCCA 152 woofers that im running on some off brand 3500 watt amps. I wanna go with one solid amp to run all 3 at a 1.33 ohm. this is a daily driver 2003 trailblazer but I want it to hump. the woofer are rated at 2500rms/5000peak, I currently have 5 d3100's in the back, 1 redtop in the front that I want to change out but need to find a battery that will fit due to the dual alt bracket that holds a 240 mechman and a 370 mechman. out of these 3 amps, which one would you recommend I run on those 3 woofers with my current setup. thanks for any assistance you can give me.

I have a 2010 Tahoe with a 270 mechman. I spoke with someone from mechman and he told me not to ground to the frame. he said run my 0gauge ground from the alt ground stud through that sensor ring to my battery negative post and when I install my second xs d3400 on the driver side to run positive to positive and negative battery to negative battery so the pcm sees the current draw. he also stated to run my amp grounds directly to my battery also not to the frame so the amps current draw is also read by the pcm.

2 pyramid 600's on (4) 15" impact woofers

ha

i have an audiopipe ap-1500.1d at a 1ohm load on 2 planetaudio big bang 15's in a slot ported box i got from hifiaudio going on 2 years now in my 2010 tahoe plus a soundstream bass processor and haven't had a problem yet. my cuzin got 2 audiopipe ap-3000.1d on 2 lanzar 1533d (1 on each amp) at a 2 ohm load in a 2003 trailblazer with a superbass probox and you will not sit in there long.