Jump to content

reedal

Members
  • Posts

    4310
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by reedal

  1. If you're willing OP, you could try turning one of the pockets on the dash (if you have one) into a slot for an aftermarket HU. You wouldn't have all the steering wheel controls and everything else for that, but it's an option.
  2. The only reason I don't want to test my LC7i on the Tahoe is because I don't want to cut and splice wires for it. But once I get my battery I'll pull the stock radio and see how much slack in the wires I have and I may test it. Anyone know of any audiocontrol distortion tests?
  3. The only LOC ever shown tested to have zero distortion to my knowledge is the SMD HLC, which was never produced for sale, only prototype. I don't have the link to the video on hand. You could try audio control products, I've heard good things. I have new-in-box LC7i but have never used it. Maybe one day I will test it.
  4. Ok. Here's the update. I'm done temporarily. Ran into a wall I didn't think of before having owned chevy's before. Side post battery. But I did get a little done. Ran my front to back wire from battery to battery (not hooked up to front batt, fuse pulled by back batt), which was a pain in the ass getting the floor trim pieces back in place with the wire there. So it's just kind of tucked away for now until I get a D3400 for the front. Finished pulling the 80prs from the explorer, put my new 1/0 inputs into my 3500. I got them in the mail a couple weeks ago just never got around to it. Decided to open up my AQ 4X90, here's its innards if you've never seen them before And here's the amp/batt rack in the Tahoe waiting to be put to use again. I threw the subs in there too, didn't grab a pic or wire them up. For now, I'm leaving the factory Bose setup in there, until I get my battery for the front, and once I can squeeze that purchase into my budget and it arrives, it will be time to swap in my 80prs, do big three, swap front speakers/tweets, run wire and RCAs, DD-1 it to see if gains change between vehicles, and then hopefully by summer I'll have a new enclosure, another component set and 4 channel, and an alternator. And this won't be just a purely audio build log. There will be eye candy upgrades to go with the ear candy.
  5. Update on the Tahoe build: had a little sunlight when I got home so I started pulling all my wires out of the explorer. All that's left is the battery, HU, amps, and subs. Sunday will be crunch time once I'm home off duty.

    1. Ahmed Johnson

      Ahmed Johnson

      Save it for the build log, lol

  6. So this is my amp rack I made a couple weeks back, needs a little work, like putting a couple pieces down to hold the battery in place. It gets the job done though The enclosure is just a prefab I've had for a few years, just don't have the right tools to make clean cuts for the design I made to make a new one. These are all pictures in the explorer. Just giving the you guys an idea of what is going into the Tahoe this weekend.
  7. My update for the day: Went to a local shop to get the metra dash install kit for my 80PRS, so thank you Sound Wave Customs of Virginia Beach, VA. Sunday I'll get that put in. But I'm thinking of buying additional speakers to fill in everything that the Bose setup is in besides just the front doors. The time alignment isn't important to me. In my explorer, the backseat only hears the subs, not the components in the front doors very well, so I want to fix that issue this go around. I'm thinking coaxials, but may go with pro audio. SoundQubed of course to stick with the theme. I may replace the CDT components for the front doors with the AudioQue set I have. I haven't figured out which has a better sound to it yet. Well, that's my thought process as of right now. Suggestions, thoughts, questions, or whatever else is always welcome.
  8. I don't compete, but it'll be a daily driver ground pounder by my standards. Not the loudest, but it makes me happy and meets my wants. Everything will be below the window/seat line.
  9. So I happened upon this clean blue beauty and for a price of almost half of all the others of similar year and mileage, I snatched it up. My build plans with it are to move my current system from the explorer into this since i will no longer own the explorer in a short time. The equipment being: HU- Pioneer DEH-80PRS Subs- Two SoundQubed HDS312D2's Amps- SoundQubed Q1-3500.1; AudioQue 90.4 Mids & Highs- CDT CL61A Wires- All Sky High 1/0, RCA's, 12ga speaker wire Power- Haven't decided on an alt yet, gotta contact singer, see what he's got. I don't think I'll go with anything over 300A on the alt. I'll have a D3400 under the hood, and I've got a D4700 i had bought for a cruze that I'll keep by the amps. Hopefully I can get started on transferring it all this weekend. I've got duty saturday so i'll have all day sunday to knock it out. The only things that need bought are the D3400 and the alt. I'll post pictures as i go through the install. edit: fixed the pictures
  10. Post it in the correct section(Head units, processors, EQ's, etc.) and you should receive more feedback. And it won't be locked for being in the wrong section.
  11. Another great transaction with SHCA. It's been almost two months, the things I wanted weren't in stock, and after being kept updated on it all, it's finally falling into place. Always great CS.

  12. Are you following the instructions in the manual? Not to be a dick, but it's not like you'd be the first one. As for the filters, you want them open not on, that way those signals don't et filtered out.
  13. Make sure high and low pass filters are open to allow signals. Test the 40hz on the low/sub-out RCA output from the HU, and the 1000hz on the mid-level RCA output. Turn EQ flat or zero, sub level at zero, use DMM, to check for voltage coming out of the RCA.
  14. The good good feeling of eliminating a very bothersome rattle

    1. ImaNoob

      ImaNoob

      You'll get a new one now..Usually how that works

  15. You're better off using your head units low pass filter unless you have a CC-1 to find the frequency you're looking for. Start at 125 and work your way down to find what frequency you want your subs to play.
  16. If you take off the protective sleeve, there's a battery cover, take it off, disconnect the 9V battery, and put a new one in. The low battery light comes on because there's a low battery. Just like how a phone tells you when it's battery is low.
  17. Mobile navigation is still quirky. Been like this for a couple months about. There was a thread about it on here but I didn't keep up with it. It says " Error: Could not load template 'launcher_link' from group 'classifieds' Error: Could not load template 'chatMobileLink' from group 'ipchat' " Edit: not that it bothers me. I don't use chat.
  18. Tony C. has me scared with his turn-on relay kit. Two amps (mono & 4-chan) on a single HU remote out (300mA) should be fine right? Using 12ga cca on a 10ft max run? The Tony's make me overthink shit.

    1. Show previous comments  11 more
    2. rockFord_Expedition

      rockFord_Expedition

      I never priced everything separately. But to me once you consider time spent making all the connections, double checking that everything is done correctly, hunting down/driving/ordering different stuff online vs. the fact that Tony gives us a 10% discount and you can spend your time on other parts of your build, and just plug and play when it shows up, it's a great deal.

    3. magillaru

      magillaru

      Yeah and considering I'm not too familiar with how to even go about wiring it up, I don't really have the time to try to figure it out now.

  19. Bought some supplies to try glassing some tweeter pods for my door panels, see how it goes this weekend hopefully

    1. hoit

      hoit

      don't forget the pics bro! best wishes!

    2. reedal

      reedal

      Haha thanks. I'll take pics while I do it, but it may end up being a "don't do it like this" lesson, cause I've never glassed anything before.

  20. Someone with money to blow away, buy a big box truck and wall it. And drive to norfolk so I can get a demo.

    1. Keith77

      Keith77

      There is already a Demo Bus

×
×
  • Create New...