-
Posts
628 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by c_stud
-
-
with that setup and it was me I'd say get an xs battery first under the hood see how the voltage does at the ampliiers, you can check my sig stock 80a alt, the gold battery from Advance auto and I drop to 12v at the amps but that will change to dual alts a 400a and a 185a
-
I did one on a 3.4L this is how i did it
-
Port tuned to 30hz
3 15' baffle
-
Hi There let's begin from where I start
How I first bought it Steelies were a nono
2 RF P1's rear ported box 3 cube, tune 36hz
Ok lets try something else
sold them and then I got in on the Skar vvx15 preorder box 3.5 cube tune 32hz on a planet audio 300.4 ran at 2 ohms
6 cubes tuned to 40hz peaked at 34hz then got in the Sk1500.1 pre-order
138.8 outlaw leaked in trunk bad!!
Did the Big 3 while doing the box
Went to SBN got even more ideas
I really couldn't sit comfortable with that box i took it out and done this right
Had a huge gap to fill here->
<- This setup did like a 141.4 outlaw at 43hz not sealed around the sides
stay tuned
-
-
let's go from where i started to where I am now
-
All Team SMD D'Amore products in a Black, Chrome suitcase at a good price point
-
-
i have an 80amp alt with big 3 done on an autocraft battery while cars running i drop to 11.5ish so the big 3 should do you just fine man im running an sk1500.1 and a planet audio 300.4 btw
-
include me in this for 4 15's
-
Robins designing my as well
-
Well ill be damn
-
Any vvx15 dual 4 left
-
Any bstock vvx15 dual 4's left?
- 1
-
You guys know anything about Encore alarms? Been looking at alarms and just trying to get one for reasonable price. Not worried about Remote start just security wise.http://www.encoreautomotivesystems.com/Encore_Automotive_Systems/Model_E4.html
-
hell yea man been watching your vids for a while now im doing the 4 15's in the Nissan
That should be nice, what kind of box are you going with?
i'd love to do a wall like Twistedchild420's setup in the Hyundai or a 4th order but I really have no experience/tools in building a wall or a 4th order i'm going to see if Singer would do it when i get the money
-
hell yea man been watching your vids for a while now im doing the 4 15's in the Nissan
-
well however told you to get a camshaft positioning sensor should have their ass kicked that sensor is what tells the distributor when to fire when the camshaft without that sensor your car would not run at all or well, now to answer your question A dirty IAC valve is the cause of a common and well-known stalling problem of the nissan maxima
-
Ordered and can't wait till it shows up to power these beasts
-
why did you use 2x2s and foam to seal up the corners and stuff?? been doin this for many yrs an 1st time i seen that. them 2x2s take away a good bit of internal airspace esp in every corner
carve 45's out of the foam
-
Damn Wrong section Can an Admin move to Member builds for me?
-
the build will be a start of something big but here goes
build will include 3 or 4 Skar Vvx15's on 2 sk1500.1 or an Sk4500.1 I have not decided yet money will decide that one
box is about 7.8 cubes is not tuned yet am waiting till i get one or two more so i can place my aero ports in it
Electrical
Stock alt
big 3 is done
Plan on 4 batteries
On with pictures
2 of 3 or 4 I don't know yet
Moved amp to the trunk this is where the box is going
had to do the one brace to hold the shape of the rear seat angle
layout of it in the backseat
the other one or two will be on top possibly inverted
that's all i have folks till i get more money :No:
-
Skar Audio
-
done the big 3 yet?
BHE-ExSKARsion C-Pillar Wall with 8-ZVX18s on 4-SK4500s!
in SKAR AUDIO - (READ ONLY ARCHIVE)
Posted
very Nice