nCOMP1337

here it is in blue with bigger rims

i have the same question for my kicker 15s here is a diagram i amde trying to explain what i was asking since my 15s are in a sealed enclosure, i wondered how i could wire them in parallel down to 1 ohm and each sealed compartment has a terminal where the pos adn neg inputs form subs go to the term on inside of box and the outside of box term goes to the amp basically all pos terminals wired together and all neg terminals wired together

thank you forgot to add earlier, i also took out some blemishes on the vehicle and took out that side strip

Here you go, hope this works I tinted the windows, painted the car red, and put new rims and tires on it

it was either that song or number 7 on the cd, raddled my trunk with 200 watt (prolly like 75 RMS though) factory system, quite surprised me

sounds nice, i always thought that song was nice for bass

i was actually looking at some soundstream amps and a sound storm amp got in the group soemhow and i didnt even realize it at first, lol thats prolly how they stay in business, or like the multitude of crap thats out there that name their companies similar to good brands, so people think it may be a lower brand or something of that bigger brand and people that dont want to do the proper research to spend a few extra bucks for even a decent system i know a lot of people that spends tons on a system and they dont even know what rms is frequency response or even port, they just thinking the person selling it knows everything and hooked them up basically if i havent seen it on this site more than once, and in good standing with some people, i wont bother with it

as far as i have seen, at least for the brutus line of hifonics, they do around rated, but i think they may rate their stuff at 14 v, which means on a stock system it would look like it isnt doing rated, i havent seen whether ti says one way or other, some amp will show you what they do at 14v which is what they advertise their power at, but they also show what they do at 12 v, depends on the amp manufacturer, i havent seen how hifonics rates their stuff, but in my own thread people said its alright amp

i prefer alienware, but i get a huge discount on dell laptops because my college has a deal with them, the studio 16 from dell i am getting, i get a 500 dollar discount, which amounts to roughly 25% of the entire price but i think dell is best for the money, unless you want high end and if your gonna spend a lot, go ahead and go alienware also,. find what you want on the site, and im sure you could find the same thing on ebay somewhere for a lot cheaper, some of the laptops i was looking at was selling on ebay for a few hundred bucks cheaper

Box outside dimensions will be 12 x 20 x 38 The black area is 1 inch wide all around. The green area is the entire port which is nearly the whole box, each area is measured in its entirety and the 45 angles were not accounted for. I am planning on three 10s right now for my car, i could have larger subs but in order to have more space in my trunk and not have to modify my trunk in any way then 12 inches is the tallest i can have the box allowing me to have it as close to the back seats as possible. I was wanting a 1/4 or if i have to at least an 1/8 wave Tline box. I hope i did the design right, i have seen where people have made subs firing into the port directly and thats not as good, so thats why I have the small opening into the actual port area from the sub area. The specs I drew this up on were 37 Hz i think with a 10 inch sub. I am curious what others think and if they think this will work. I understand with more subs you have to account for adequate cubic feet for each sub and port area, so I am hoping these will work alright in this box.

i always just create my own, i typically use plain black background though as its easy on the eyes, but im a photoshop whore so i always did it that way fractals are cool though, google them, or any kind of space stuff, the galaxies and stars always looks sweet

yea, them funky pups are amazing, i couldnt believe my old 6x9s had a bigger magnet then them, lol but them pups are banging subs =)

i believe Fi is cheaper but both are incredible subs from what ive seen

yea, major brands, i just try to stay away form, except certain models of kicker, RF, Pioneer and MTX, besides that i dont really think the others are worth it and these brands for what you get are way to pricey compared to others like FI and DC and SA, quality and efficiency are just so much better when not on these mass produced subs i think so anyways

i know all that is fine cause i took an older pioneer radio and installed it and it works fine, changed nothing except took wiring harness out of new one plugged into old one and took the radio ant out and put in new one and plugged in RCAs everything works fine, just cd player skips at 1/3 volume and shuts off at half

i would think it would be a bit closer to 9 something take the average of 35 and 250 and its 142.5 , which would be pretty close to 12 o clock, notice the numbers do not meet at 6 o clock though, so i would take 285 divide by 11 and you get 25.9 , round to 26, so basically each hour is equal to 26 Hz, which puts 5 Hz in between 6 and 7, which would make 7 o clock about 50 , 8 would be 75 , 9 would be 100 , 10 would be 125 and 12 would be about 150, now this is pretty close to my earlier suggestion that 12 is about 142 since its the average of 35 and 250, but taking into account that n umbers dont go all down to 6 and it ends about 5 instead of its original starting point id say this is close so every minute is equal roughly to 5 Hz, but we will say 4 Hz since 250 doesnt complete a circle, so 80 Hz would be equal to 20 minutes or 4 total Hour skips (from 35 Hz roughly between 6-7 , to 80 Hz which is around 9) 35 is a 6.5 , so we will say 3 minutes to 7 , makes it 47 since i said each 1 minute notch equal roughly 4 Hz, so another 5 to 8 o clock makes 67 , then we have 13 left to get to 80, so 12 is another 3 notches so that puts it at 8:43 roughly, making the total Hz at 79, so just in between 8:43 and 8:44 should be 80Hz 7 = 47 8 = 67 8.5 = 77 8.66 = 80 Hz here is an image with the dial actually at the point im talking about i wont say its exact, but its gotta be close EDIT: damn, every number 80 (eighty) is damn emoticon, LOL

your welcome

looking good, sweet color, cant wait for a vid of the new cherrymeade disturbing the peace

I got a pioneer deh-1100MP cd player for y car, brand new last may, and when i turn the volume up to 20 it skips as if the cd is scratched, but ti does the same on radio and then when i turn it up to 25-30, it just shuts off i spoke with pioneer and they think its an internal amp problem, but since i have no warranty they wont fix it and there are no places around where i live that fixes them unless i bought them at the place of business so my question is does anyone know how i may be able to fix this or should i sell it to someone that can on ebay or something and try to find something new

many people will say treo over JL i think because its an enthusiasts brand more than a common brand like JL brands like FI, RE, DD, AA, sundown, treo, i never heard of any of them until i got interested in car audio and began researching, no one where i live knows of any of those brands, and brands like FI and RE and DD, take a lot more car into their products and they are not as massively produced, some of those brands dont even build the subs until you order them, they seem to be on a more personal level with car audio people than JL and other common brands you might find at walmart, or best buy, or hh gregg or various other places almost always if you have to special order anything, or buy something that isnt sold in most stores, that typically sell items like that, its going to be higher quality product than those massively produced and shipped out everywhere

trying to pass off this insomnia to someone, gotta be at work in 1 hour and no sleep in long time oh and posting around SMD

just thought id try

front bumper not fully white, because of the shadowing, should be more realistic that way, windows, side strip, rims, back bumper, all be turned whitish

hope all goes well