SnowDrifter

Ayyy what's up bud

I would be surprised if that fried it. It's just a DC reference signal. Same as you'd get on the 'positive' side with the volume down. Toss a new battery in, make sure your cord is plugged in all the way. Try measuring again either on the deck, or pick an arbitrary low volume setting on the deck and check at the amp.

@TonyD'Amore

Depends if you need the extra voltage capability or feature set the dd-1+ offers. tl;dr, dd-1+ does 200v amps, real time display of gain overlap and voltage. dd-1 is binary on/off and depends on different amplitude sine wave files to set gain to what you want. Realistically, dd-1+ should do you well unless you're working with tremendously large or strapped amps. The other features of a dd-1+ are I think more suited for a shop environment (makes documentation easy, no going through lots of tracks, etc) or someone who's always tinkering with their system.

Please read the for sale rules here thanks!

1. Stop keyboard yelling. We are a public forum. A tantrum is more apt to be ignored. No one wants to carry on a conversation with an angry man-child. This goes for all your posts. We are not your enemy. 2. Lest it be forgotten, we are still in the middle of an epidemic, economic crisis, and social unrest. Many still work from home. Sundown may or may not be there to answer phones. Email continues to be the best route of communication in these times. --- all points below need to be answered. If you skip one because you don't feel like answering it, I'll skip the thread because I don't feel like helping --- 3. Shitty is subjective. Describe in clear, concise detail, what your issues are. Re-state them clearly. 4. What are the specs on your box? 36hz tells little. Post measurements, 3d models, pictures, etc. Give us enough information that someone could build a 1:1 copy of your box. 5. How is the box mounted in your vehicle? 6. What vehicle do you have? Do you maintain the original radio, or have you installed an aftermarket unit? 7. How is the LOC installed? Give enough information here that if given the same vehicle, I could replicate your install here down to the smallest detail, including any settings on your LOC. 8. What method, if any, did you use to set your gain and crossovers, and how was this validated? 9. What are you using for wiring, and how is this done? Have you verified any voltages? 10. What steps, if any, have you taken for diagnosis of your issue?

Darn is that thing as big as it looks in the pics?

Upload to youtube and post here How did you set the max level for both your deck and amp?

Are you clipping?

What do you suppose happens if you have an amp powering a driver with a short that has a 0 ohm resistance?

If it will help is dependent on if that's the problem. Give the drivers it's powering an inspection too. Make sure a tinsel didn't pop off or cross somewhere

Speaker wire shorting out anywhere? What about power wire? Frayed ends coming out?

No brand vs brand comparison threads thanks!

Nice. Love that stuff

Interesting @meade916 @TonyD'Amore

You do not - can load the tones onto any medium you wish. If you play via bluetooth, set things while playing through bluetooth, etc. There's a link to the original tones in my sig along with some 2.5db increments

Found the news article https://komonews.com/news/local/father-of-special-needs-girl-overwhelmed-by-generosity-of-strangers

Welcome!

1. If it's a bass knob, throw it in the trash. If it's an attenuator such as an lc-1, it should be set to max 2. Set with all levels at zero. Further adjustments can be made by turning items down as opposed to up 3.0db for head unit, then appropriate choice for amp. If you're relying on the head units internal amp for your mods and highs, check with 0db through RCAs, then chosen overlap for the speaker out. Choose whichever is the lower volume setting to continue 4. See 1 5. Pulses as in turns on and off? Preout might be weak. Measure head unit through the amp - I think the manual touches on this. If not let me know and I'll walk you through.

That's not an amp. It's a box of black magic fuckery to pull 3k out of it o.O