-
Posts
1862 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Tarball
-
-
Also, the Sonic Electronix vendor page is not the best place for this topic.
Welcome to the forum!
-
I think you are combining EQ and Crossover together when they are two different things. Or maybe using EQ in place of Crossover.
If you want to use the Low Pass crossover on your deck its common to just turn your amp low pass crossover setting to the highers frequency- usually all the way clockwise.
-
-
In general:
- All of your batteries in the back should be grounded to each other and at LEAST one run grounded to the frame in the back.
- All of your batteries in the back should have all positive cables connected to each other and at LEAST one run going to the front of the vehicle (connected to either Bat+ or Alt+)
I think this is what the shop was trying to say.
-
Thanks!
I didn't realize my other thread was archived.
-
Congrats, I'm way behind, I probably wont be a grand dad for another 10-15 years+ ....ideally.
-
Any 14v plans coming soon? ?
-
Already running the 5k with 14v batteries. Dedicated alt for the 5k. Why not get as much out of it as it will give ? Plenty of space for batteries.
-
18.? 18.2 ? what does it actually protect at ?
-
Title says it. What is the highest voltage that a DC 5.0k will take daily. I'd like to switch to 16v batteries.
-
Still comes down to wallet, you are going to pay for that idle output.
-
In a word - WALLET - get as much alt as you can afford.
-
Feb 15, 2011 - High Point, NC
Where I'm at is not where I'm from and where I'm from is not where I was born.
Born in Bronx, NY
Grew up in Apopka, FL <--this is where I'm from
-
Guys, the reason we never finished the HLC is because of cost. By the time we got it all done, we would have to sell it for almost $200 just to break even. The fact an HLC is usually geared towards someone who is already taking a short cut (tapping into a factory speaker for a signal) leads me to believe that nobody is going to pay a premium for this unit. It is one of the cleanest HLC's ever made for SURE though.
It might be released someday still though! Once we figure out how to get costs more reasonable. Remember, manufacturing something by the 100's is 100x more expensive than manufacturing things by the 10,000's. That hurts us too.
I have a feeling you could sell 10,000 non-distorting HLCs in a heartbeat. That should bring the cost down to $2 each!!
-
Thanks for entering guys! Here are the winners:
-evermaxx
-BooMZoom808
-Motorboat -. I would get NVX tattoo'd on my left ass cheek.
-Benji0687
If you won, please PM me with shipping information. Congrats!
Not that i really wanna see this but
- 2
-
Witches should scare you, they are scary.
-
you need stepdown modules if you cars computer cants handle the 16+v charging that a 14v battery needs
-
Kinda obvious what I meant, right?
How is a Amp supposed to be i ohm stable?Is this amp even i ohm stable? Im only finding 2 and 4 ohm ratings.
Just want to be sure 1 ohm tests will work before I guess.
i didn't even notice...
but ya, how the fuck can it be i ohm stable?
Fuck.
I was gonna try to come back with a smart-sounding reply, but.......
I guess fat fingers got in the way LOL.
Fat finger my ass!! (no pun intended) the i and the 1 arent even close to each other!
- 2
-
-
damn, a LOT of my arcade roms are not working. Can i get a link to a current version of mame and a link to some roms that WILL work? (ARCADE). Every version i try seems to have errors on most of the roms i have tried. I am on a 64bit system if that matters.
I;ve got a gang on mame roms somewhere. Do you have online storage anywhere with a few hundred megs of space ? IM me .
-
add electrical support if your voltage is dropping on a clean signal. Also, is your music source the same db as the track you used to set with DD1 ?
-
Yeah, fancy flying spinning kicks is not how you begin a match. This is one example of why.
-
B-stock is good stuff I did my truck in B stock damp pro and it rolls on perfect and does the job!
-
In for knowledge on the vacuum lines. what type of tubing do you use?
Smd vm-1 stock
in D'Amore Engineering - High Quality Car Audio Installation Tools & Accessories
Posted
Is there an updated path to the manual. Dead link for me. Thanks ?