Jump to content

Omega5002

UBL Approved Group
  • Posts

    3636
  • Joined

  • Last visited

  • Days Won

    4

Posts posted by Omega5002

  1. No need for the terminal cup in my opinion, just simply get some brass bolts, washers, and wings nuts from Lowes, and some trim rings for the speaker wire, drill the hole on the box, stick the bolt through the internal speaker wire ring, out of the box, and place the external speaker wire on the other end, and secure it with the wing nut. Much easier to install in my opinion, and a lot more secure, and easier on wiring.

    Here's an example of mine

    169341_500188919998032_887705627_o.jpg

    178521_500189089998015_1265909832_o.jpg

  2. EQing is for correction of frequencies for rooms or different car environment, so when you have certain peaks or drips due to the shape of the car, correctly done, an eq can correct that for flatter response, which is what you're looking for.

    The best eq I've seen so far is the Audison Bit-One(not cheap), where it has a mic and you play pink noise(20-20000hz flat noise), and eq through a computer to get the flatest frequency response possible .

  3. i have one in my wifes car its ok but dont expect alot of power out of itit probly does closer to 500-600 watts

    I expect nothing out of this thread, than that one of the US members can get a in the Forum well known 1500 Watt amp for 140 $.

    It´s to damn expensive to pay the shippingcost to Germany, if you can read my Avatar, + the 19 % tax on the amp + shipping.

    That's gotta suck

×
×
  • Create New...