SMZ2

Okay sweet. Oh my bad I'm on mobile it doesn't show signatures.

Alright man thanks. And you recommend the dd1? So what are you running in your car?

But I don't think I did it correctly I usually just do it by ear or turn it like 1/4 of the way until I get the necessary equipment. Plus I didn't think like 150 watta would hurt anything lol. I've tried the multimeter only a few times haha.

Well its cool man but the new amp I'm looking at when I upgrade has a clipping light and I might try and get the DD-1 destortion detector. And sorry for blowing up I just heard if you didn't have an oscope it was perfectly fine to do it with a multimeter its only gain like 1/4 of the way. But yeah my other subs well it was only one 12 the only worked but its was rigged with a little peice of metal which caused it to spark and it melting part of the cone haha.

The amp is a 300 watt kenwood 2 channel I have it hooked up to push 150 watts bridged at 4 ohms the sub is a pioneer TS-W252R its a really cheap sub but I'm looking for a new amp and a 18 but until then this is all I got thanks man.

There is a method to set it correctly with a multimeter and test tones but I didn't make this topic to be called ignorant. Thank you for you input but I also don't currently have enough money for a oscope hence the reason I'm saving for a new system. I don't turn the gain up all the way either if that's what you think. Anyway does anyone have some real help. I don't lack knowledge just funds.

Anybody else wanna chime in the sub just needs a bigger box and I could use a good design just to give this sub a little more umph

I use a multimeter.

Nah I didn't blow them I bought them from a pawn shop and they wete rigged to work haha. Never buying from a pawn shop again. But maybe not really low then and I set my amps right it just needs a bigger box its in a tiny prefab box

I have a crappy 10 inch pioneer I think its 200-300 watt rms but I wanna build a ported box for it tuned really low my other subs blew so its all I got until I get my new system.

If I removed the motor I could use a 15" basket and a 15 inch recone since there isn't one for a 12

Okay well I'm going to talk to him then I'm going to start cutting. When I get down to the motor and the basket how would I remove the motor? I took apart my old polk 12 and when I tried removing the screws attached to the motor they striped.

Is there anyway if I'm really careful cutting I can reuse the softparts after fixing the pole piece or is there anyway to take off the magnet without removing the softparts?

Its a 12

My friend gave me his sub to look at and see if its fixable its a rf p2 its and 8 ohm svc model. Anyway he dropped it one day and it quit working. I pushed down on it and its rubbing really bad it hardly moves unless you push down hard. I think its coil rub can thia be fixed if not it will have to be trashed I don't think there are recones for it.

Pricing shipped to 27809

Any other blown 18s

I'm looking for a blown 18 such as a hdc3, fi bl, fi btl, or anything else I'm open to anything thank you.

how much for just the aq motors and baskets?

Ill probably go with 35hz then. Because I listen to everything rap, classic rock, punk, reggae, beats, etc, and stuff that doesn't have a category haha. but I'd like to give the occasional demo also.

@mlstrass why is that what I listen to alittle bit of everything including c&s music

I need help designing a box for an AQ HDC3 18 with copper coils. I drive an 2002 nissan xterra. I have no idea how to design a box really but I can build it. I just need help with the design. I also want it to be tuned to 32hz. Thank you.

Level 4 18 and level 4 18 with Level 5 upgrade Xl 18 and direct leads on the subs 175.4 amp 27809

I'm about to buy the lumber to build the box but one question what would I use for the bracing?

Yeah thanks man. Sorry it just helps a whole lot more especially since this is my first time building a box haha.