[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Drivers door done one more to go! 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Slowly making progress. Got one door almost done with body filler. Last coat of filler is drying now and then it will be ready for vinyl. Then to do it all again on the passengers door. Lol. Also, got two sets of soundqubed super tweets installed. Will have to wait till it's light out to get a good pic of those. But here's the one door thats almost ready for vinyl. 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

3 hours ago, bsneon98 said:

Looks good so far. Also your lucky you can still use sunflash where your at lol 

Why wouldn't you be able to? It was about 20 degrees when I did that door and it worked out pretty good. Does it not work well in the cold? 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Still waiting on more ca glue so I can stretch the fabric over the passenger door. But I figured I'd start to fiberglass the drivers door while I wait. Got the resin laid down, cured, and then laid down the first layer of fiberglass. And I must say. I will NEVER buy a two part fiberglass resin ever again. The SMD Sunflash is so amazing. Can work on it however long you want, bring into sun, and it's set! Can't wait for these to be finished and playing!!!

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

One door all stretched and ready for resin!! One more to go!

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

12 hours ago, 420ninja said:

i like the doors turning out nice

Thank you  will be stretching the fabric today and maybe laying down some resin! 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Made a little bit of progress on my doors today. Got the rings all mounted and glued to my panels. Test fit was very tight. There's barely any room behind the speakers, and between the speakers and seats. But I think I'll be able to get them to fit. Too late regardless! Now just gotta find a good way to stretch the fleece. But I'll save that for another day. 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

6 hours ago, Wishuponasub said:

Well,damn. That definitely sucks.

Yeah I was pretty bummed. Was so excited to have bass again after about a month. 

3 hours ago, Karkov said:

NOOOOOOOOOOOOOOOOOOOOOOOO

 

well i guess you can chalk it up to how people learn?  Hopefully you figure out what was wrong exactly (sounds like you did)

At least I can get more reconing experience. Lol. What it seems like is one of the polarities of the coils were reversed. I put each coil on a dmm and they were all fine. But thinking one was reversed. Wasn't anything I did wrong. So he said he will make a new one for me. On a positive note, it was quite loud with 1 working sub. Lol

42 minutes ago, YukonXL04 said:

Well it's coming along! Bummer about the recone! When's the wall coming? Lol

Depends on how fast I can find some hdc4 motor and baskets, and get recones for them. Plan is 4 of the custom hdc4 15's on 4 3500's. I have all the amps, two of the 4 subs, got another Q4.90 for mids n highs, and I got 3 more sets of mids to put in. 

Next step is start on door panels for 4 6.5's in each. Got everything to do that, so may get started on that soon  excited to try the sun flash  

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Well, one of the recones only lasted a day  something was reversed in the coil or something. Cut the recone out and prepping for a new recone that will be made soon

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

A little bit more power came in the mail today . Two more Q3500's. So I'll eventually have 4 total 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Should be playing by the weekend! Got my spl audio recones today. Will look pretty badass with the carbon caps too! Also got some more power that will be here tomorrow 

[Speaker wire running?]

Good advice above. You I'll need to run new speaker wire from your amp, to your speakers. The only thing going to your amp from your head unit is the RCA's and remote turn on. 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Got 3 more sets of mids for my doors  so I'll have 4 mids in each door, a set of tweets in the dash, and two sets in the A pillar. Can't wait!  getting prepared to get loud soon 

[Skar Audio LP1000.1d - 1000 Watts for 129 Bucks? AD-1 Amp Test and Giveaway inside! Claim 3 spots! UPDATE - WINNER PAGE 195!]

SKAR AUDIO FTW 1000.1 CLAIMED

[Skar Audio LP1000.1d - 1000 Watts for 129 Bucks? AD-1 Amp Test and Giveaway inside! Claim 3 spots! UPDATE - WINNER PAGE 195!]

SKAR AUDIO FTW 1000.1 CLAIMED

[Skar Audio LP1000.1d - 1000 Watts for 129 Bucks? AD-1 Amp Test and Giveaway inside! Claim 3 spots! UPDATE - WINNER PAGE 195!]

SKAR AUDIO FTW 1000.1 CLAIMED

[Post a pic of your Mechman alternator]

2 mechman 240's

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

5 hours ago, Karkov said:

Nice man!  Never got a chance to re-meter before you needed a recone?  

SMD goodness looks nice under there, clean...

No I didn't get a chance to re meter. Blew one before I got to it. I'll Meter both drivers and passenger side when I get my recones in. 

And thank you! Love the look!! Can't wait till I wall to get room to display the 8 spot one  looking at buying a third car for a daily driver. That way that frees up my blazer to go all in. B pillar with 4 hdc4's and 4 3500's is the plan. Won't become reality for a while. But it's coming sooner or later

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Got the wire tidied up a little bit. Made some panels to cover up under the amps. Left side looks a little like a rats nest still it's hard to organize 9 runs of 2/0 and like 10 runs of speaker wire.. But right side looks pretty good. Can't wait to get my recones! Going nuts without bass

[NEW SMD XL Series Fuse Blocks]

Awesome!! Love my 4 spot. Can't wait till I wall, and can find a nice spot to display my 8 spot. Badass man!!

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Got my welding cable today. Got the two runs ran under carpet. Just need to finish fusing and joining up to batteries. Looks pretty nice under the carpet. Like the look of 6 runs  

 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

Added some SMD goodness  adding two alt runs to the back too once my 50' of 2/0 comes in. 

[SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)]

3 hours ago, audiofanaticz said:

Ports on the wrong side may hurt you a little. If you ever get a chance to meter again try the sensor on the driver side dash (instead of passenger side dash).

I'll give it a try. Thanks!