Markous

I've been using 2/0 & 3/0 Carolprene branded welding cable for years with zero complaints

i had pretty good sucess in my Ranger re-using the factory antenna with the 200 series xm reciever unit with my Alpine deck. every so often, maybe twice a month i would get an antenna error that was fixed with a few power cycles of the deck

Nice! I see these pairing well with the conductor from Sparked.

Size comparison for a sense of scale Didn’t think i’d ever use these nearly 10 year old RCA’s on a D’Amore amp

Picked up this beauty this morning 😁 Didn’t have time to take any more pictures for now, will post more this evening

IIRC Jacob had a v3 ready to go but scrapped it for some reason i can’t recall. There are some pictures of it out there, looked like a monster!

Up to 16v and 625 amps? That should take care of most anything that ends up on the bench! ??

That beginning was tough to watch, my room got all dusty and shit. Some fucking people man! Shit like that makes my blood boil! ? He has come along way and become a beautiful dog, he has you to thank for it Steve! I wonder if you would take in an abandoned bass head you might find in that field? ?

Saw this video the other day, made me think of baby, LOL!

It bears repeating, That's a beauty Steve! I could build a false floor and wall my Ranger with that sucker! Surprised it only took two bottles of Raptor to get it done, makes me think i over did my enclosure for one 15 that's a third that size, rolling on four, LOL!

That black wire sure looks like it has a smaller outside diameter than the green, either that or it's one heck of an illusion!

Looks like a killer system that would be tough on the body! I ain't hatin' with this comment but i have a curious observation of the sweeping shot of the amps in the back of the ride. Why do the + leads going into the amps look like 4/0 and the - leads look like 2/0? Basing this on the look of the OD of the wire jacket compared to the input adapters. With a setup like that there has to be some type of logic behind it, right?

Fuckin Rights! got past that consistency error, thanks again reedal! Pretty sure the t/s numbers i got are nice and accurate too because with the box volume i had it in (4cubes) it has a Fsc of 1hz above the peak frequency of which i metered in back in early February. Not sure i'm interpreting that right but it is encouraging at least!

Thank you very much @reedal ! i will try your procedure this afternoon and report back.

Just dropped the digits into winisd pro and . . . . . Getting a QTS,QMS,QES consistency error, sure looks to me like input the correct numbers in the right input fields, no?

this is what it came up with with the new data input

You mean the fields labeled f1 & f2? retake and input the numbers found at 3.66 ohms above and below instead of 7.7? Thanks again man, it is much appreciated!

#'S from SI's website. Damn, Tony wasn't kidding about the discrepancy between #'s ?

Did i do it right? (right value's in the proper fields?)

Excellent! thank you SnowDrifter!

I need a favour from someone who has the ability to punch some numbers into Excel for me to get some T/S numbers for a sub i have. I followed Tony's video to the T and i got myself some #'s for my Stereo Integrity HST-15 mkII. I don't have Excel on my computer and don't want to pay $80 to get MS Word and don't feel like chancing a downloading of something that might have a bug in it. Here are the numbers i got in order as seen in the video above Cone diameter - 12.25" DC resistance - 0.8 ohms (coils in parallel) IM/SG Probe resistance - 0.14 ohms IM/SG connected to driver max. impedance - 18.6 hz & 16.4 ohms @ 7.7 ohms below - 14.6 hz @7.7 ohms above - 22.8 hz Weight added - 190.3g (master lock and small dab of blue tack) Peak impedance with weight - 16.1 hz & 15.3 ohms Pretty sure that's all the data required, if i missed anything let me know and i'll get it

That look and head shake from Brandon ? fucking priceless!!! Looked like he was gonna be ill a couple times! Didn't catch it in the video Steve, did buddy mention what it meters at?

A well deserved spot on a list with many other great car audio products, kudos to both Tony & Steve for a tremendous product! I know i'm proud to own one of these besides a CC-1 and my newly acquired IM/SG.

When i grow up (40 goin' on 18) i want to build shit like Steve Meade does! ?