Search the Community
Showing results for tags 'box'.
-
I need help with the aero port with the box im designing. Box specs 19 W 20 L 15 H Fb 34.57 Hz Now i am wondering if the aeroport im using is good for it. Im thinking 2 x 3.25" ports 16" long. Is that good for the sub? its a american bass XFL-1222 which im gonna be pushing 1500 Rms (3000 max). I want the ports to be on the front face beside the sub. Let me know if this seems good?
-
I have recently gotten a sundown audio zv4 15" d2. I'm looking for an amp that will power it along with a secondary battery and then the best way to build a box to go into a Toyota Corolla trunk Whether it's sub port back, sub back port back etc What are some great amp brands that will rms 2000-3500 watts and sustain play It can be bang for buck or bigger price range Also would a aero port be better or regular port space wise and effiecency wise Thank you very much
-
I've been searching around for a few days now and can't seem to find a good answer. I'm hoping someone here can help! -
so im getting ready to do a small budget build in my accord. nothing too crazy just a pair of the new skar audio ix 8's d2 on a jbl cs300.1 amplifier with all execution audio zero gauge plus kinetik powercell and sony 4 channel with pioneer coaxils and sony receiver. i plan on making the box around 1.8 cubes after speaker displacement. i plan on putting in an aeroport. my question is what size port should i get for my pair of 8's? i read a thread on here about ports but i just dont understand everything fully. i was thinking a 4 inch port would be enough for both but im not sure. any help is appreciated. also wondering what i should tune it at as ive never used 8's before and didnt know if tuning them in the mid 30's would sound good or not. i checked the skar website but they dont list box or tuning specs.
-
I just ordered two sundown audio SA 15 d4 subs. I have a CT sounds 2500.1 that i plan on powering them with. I have a 2001 Oldsmobile alero 4 door, I took out my back seats and plan on puting a box back there since theres no room in the trunk. The amps are going in the trunk along with the battery. I have been doing research trying to find some box designs online but could only find 2 box designs that are slightly to big to fit. So if anybody could help me with a box design i would appreciate it alot. My max dimensions for my back seat are 26 height, 21 depth, 34 width . recommendations are 3-4 cubes 35hz. i would like the box to be on the smaller side but not to small maybe like 3.5 cubes to each sub or 3.2. -
Hello, im from Belgium so sorry for my bad english, i hope you will understand me. im planning on buying 2 Sundown SA 12's and im going to run them on a Massive Audio N3 amp. and i need your help and thoughts, i know a little of how to calculate a box for the subs bud im not not that good in it. 1, i drive a Ford Fiesta mk6.5 and my car runs on 14.3/14.4V 2, Does the 12's going to be too big for my car? i want A LOT OF BASS, i love the very lows like decaf songs etc... 3, i will do the big 3 upgrade to my car bud i would love to keep the stock alt, is that possible? 4, will someone plz design a box for me for the 2 12's? i was thinking about a 30Hz tuning, subs facing up, and the port in the middle of the subs (also facing up). or would it be better to face the port to the back? my trunk dimension i can use are: 45cm height, 97cm wide, 45cm deep. I really hope you will help me out with this, i dont know that much of subs/amps/box making, i ony installed some entry lvl sub/amps an made 1 box for a kicker L7 12" so i dont have that much experiance. and if you agree to help me out with this, will you plz design a box in centimeters / millimeters with 18mm MDF? because here in belgium we only got 18 or 21 millimeter MDF. (not 19mm like 3/4inch and with torres calculator you only can use 19mm MDF) You don't know how much i would appreciate it if you would help me... Plz let me know something... grtz -
I just got my brand new DC Level 4 15" sub today and Im going to put it on my DC 3.5k for daily use along with competing in spl. I have a 1991 Nissan Maxima and was wondering if I could get some box suggestions, (on net volume, port size and length and tuning frequency ect..). I'll be overpowering it by quite a bit so I wanted to make sure I made the box right. I was thinking something around 3.25 cu.ft. so itll fit in my trunk. Thanks. -
I would like someone to design a box for a zvx 15 that is ported at @32hz and is 3 ft^3, the cut out is 13.9, sub woofer displacement is 0.17 ft^3 , and the mounting depth is 9.3. It will be a trunk box so port back sub back and would like it to be double baffled, willing to pay for a good design thanks!!!! Will be running an aq2200 in a 1995 toyota avalon xl 30x18x17
-
Hey SMD, Been a crazy few days over here in Marina Del Rey just kick ass and taking names on some car audio builds. I have been getting more calls for 911 audio work these days than the Cops. Here is a sweet old school Porsche Turbo 930 that we install a full custom audio system. We went with the pioneer DEH-80PRS deck to get a stron source unit that does iPod, Bluetooth, and 24 bit DAC and has a pro mode so we can run High MID LOW instead of Front Rear and SUB. We chose Focal P165V30 30th Anniversary edition Front Components, PC130 for the rears We powered the system with a JL Audio XD700.5 and used a Kenwood eXcelon 10" shallow sub! Hope you enjoy! Here's some photos of the build -
I am about to build this box in 2 hours with a friend, so any quick input would be nice, I did a lot of calculation, tried to keep port bends as low as possible, only 1 bend, port area I think is good, especially since im putting these 2 subs on 2.5x power daily, a kicker zx2500.1 for 2 Sundown SA-12's Let me know if you would change anything quick, from what I can see its setup well, but when you been working on something for the last 6 hours you sometimes miss stuff in torres calc it wasn't calculating the port area correctly, so I found the box internal volume after all displacements and then acted like the port was external to the box, winISD and torres gave me the same tuning when calculating it that way, I am going for 34hz with 3.22 cubes inside, I would have went bigger with the box but with the extra power I need a bit smaller airspace for sub control, I measured the Port Length right down the middle which is what your supposed to do I believe Just let me know if I messed up on anything, even if you look at it quick, at least say yea or no or something, THANKS A BUNCH GUYS!!! -
custom 3.8 net cubes with 2x 2.5 inch round ports at 5 inches long with to SA 12's rear baffle lined with fleece.Decent sq but prefab Q slot port sounded better WTF? -
Hey guys I didn't now whether t post this here or in the enclosures section but here we go. I would like to build a custom ported subwoofer box for my 2000 Jeep Cherokee Sport. I have 36 inches wide to work with and 31 tall. Any help would be much appreciated. Oh and this is for 2 DC level 3s 15".
-
Ive been looking but havent seen anyone really do (3) v3 z18 subs. i just got 3 of them and have 3 hifonics brutus 2100d and am curious has anyone had experience with these subwoofers? Sundown says 4 ft^3 and that sounds too small. Also, this is my first real system, gathering everything i think i need. Input appreciated.
-
I picked up an AQ HDC3 15" dual 2 (copper coil) and need to build an enclosure. The tricky part is getting it between the bucket seats in my 1994 regular cab chevy pickup truck. I plan to do a slot port enclosure, but have no idea what frequency I should tune to or how many cubes I should shoot for. I couldn't find the info on audioque's website. I planned to mount the sub facing the dash with the port on the floor and also facing the dash as I had some success with a similar box setup. Variation suggestions in this are also very welcome. If I am leaving anything out please let me know. Thank you in advance for any suggestions. And sorry if I'm posting incorrectly..noob here. -
Hey, im new to car audio, im 18 work for minimum wage. I drive a 95 civic ex, so far i have a false floor in with a hifonics 1500d amp mounted to it with a Sa-12 in a prefab box i got for free. I just purchased a table saw and now have everything i need for box building. I was wondering if anyone had a design for Sa-12 box. preferably 35hz tuned. If anyone could give me dimensions with port/vent included. I was looking at doing an aero port if anyone can include that in a design or dimensions please include where to put the port, how long, diameter etc. Thanks in advance please reply! -
Whats up everyone, i'm new here and I'm really getting into car audio. Right now I have a 2004 Chevy Silverado that I threw 2 shallow P3 12's in. I really want something louder. I'm not quite ready to do a blow through, so I want my first build to be 4 Sundown SA-8's underneath the rear seat, facing the front. I want two 4" ports, one on each side. I'm extremely new to box building, but I learn very fast. I have a few questions, and I would also really appreciate some pointers & tips. Question #1: Since I want 4 subs with a port on each side of the box, am I going to need to put a center divider in the center of the box, so that I create two chambers, each with two subs and a 4" port? Question #2: The SA-8's recommended box volume is .5-.75 cu. ft. so should I simply take .5 and times it by four, giving me a 2 cu. ft. box volume for the 4 subs? That's all the questions I can think of...for now. Any tips or other help is GREATLY appreciated!! Thanks, Mike -
the box has 22.86 cubes and 220 inches of port tuned to 35 hz. it will be in a 92 full size blazer subs up port up. port will be by back window. never built a spl box and need all input i can get.
-
i have 4 mofo 15s, i would like to pull some decent numbers and keep it an every day driver. the box will be 22.86 cubic ft, 220 in. port area, tuned to 35 hz. all will be double thick 3/4 in mdf, with bolt bracing. subs and port up port. port by back window or up front? will it work correctly with the subs i have? love to hear your input. new to this big of a set up.
-
alright i have 2 options for what i can do with the box, 1. 3.94 cubic feet @ 32 hz with 3 4" wide areo ports= about 37 inches of port area 2. 3.54 cubit feet @ 34 hz with 4 4" wide aero ports = about 50 inches of port area Can anyone explain pros and cons of either, weaknesses and strengths. SPL or for trying hairtricks? and i can tune the amps subsonic frequency 7 below the box tuning or is it 3? -
Hi I'm planning on building my own box for a ROCKFORD FOSGATE T2. I was wondering if someone could help me with a diagram with the dimensions, because I'm not sure how to incorporate a port into the box and where to put it for the best sound. I wanted it ported and it has to be small enough to fit in a sedans trunk. Any help would be much appreciated. Thanks -
Hello everyone, I am planning on building my own single 12 SEALED box for my sub. The sub recommendations for the box volume is 1.37 cubic feet. I'm new to this stuff so can anyone just give me measurements of wood i need so i can go cut it and put it together? I'm going to use 3/4 MDF wood. Just give me the height X width of each side i need. please and thank you very much.
-
i have a 92 full size blazer. 4 pa mofo 15's on a hifonic bre2500d. i want something that can pull great numbers and if possible do hair tricks. the dimensions i have to work with is 48wX27hX32front to back. not sure what box design would be best for a suv like this? new in the spl game and looking for someone to help out. -
i have a box made for my full size blazer with 4 pa mojo 15s 38wx32dx20h and i want to tune it to 35hz. can someone please help me figure out what size my port should be?
-
I was wanting some opinions on whether I should port this box or not. It's right at 3^ft after sub and brace displacement. There will be 4 skar vvx 10s in it running off a crescendo bc2000d. That is an amp rack on top in case anyone doesn't know. Thanks for your time.
-
hello everyone!! Looking to build a box in my trunk . walled off . I don't have the tools or a shop. So my question for everyone one out there is: Does anyone know of a GOOD shop in the Columbus ,Ohio area. perferable with experience of walling a trunk. I have to get the pressure off my trunk lid. It is ripping at the hinge mounts. my car hates me...lol
