Search the Community
Showing results for tags 'sundown'.
-
I'm looking at buying two SA8v1's from a guy off Craigslist and he claims they were blown due to 'clipping'. Does Sundown or somebody else make recone kits for these badass little subs? He wants 70 for each or 120 for both. Good deal bad deal? -
i have a 97 ford ranger supercab and im looking for a box size that will fit but bring me its max. currently they are in 2 seperate boxes 2 in each looks like a wall and i believe that they are 3.7 cu ft each they are custom made but idk the lows dont sound to good to me maybe more power? -
1. Product: Sundown SA 12's Dual 4ohm 2. Specs: Re: 7.07 ohms Fs: 33.96 Hz VAS: 24.63 L Qes: 0.55 Qms: 5.15 Qts: 0.49 Le: 4.84 mH BL: 25.67 NA Mms: 237 g Cms: 92.27 uM/N Sens: 84.22 dB 1w/1m 3. Description/Condition: Used however these have been babied since purchased, they are in mint shape and only see heavy play for a few mins at a time as I do not travel that far to school etc. 4. Price: : $300 for the pair LOCALLY, other than local shipping would be actual cost roughly $25 per sub via UPS ground. 5. Pictures: First two contain the required info in the photo then the rest do not, I am also linking a couple that are HIGH resolution. http://www.bortzmedi...4sale/left2.jpg http://www.bortzmedi...sale/right2.jpg -
Just got my 2 Sundown SA-10 D4's in and am trying to figure an aero-ported box design tuned to 33-35hz for a 96' Mustang GT. Available trunk dimensions are 33"w, 20"d and 15"h. Jacob (from Sundown) recommended 1 cu. ft. per chamber but I'm hearing a lot of others having great results with larger enclosures, which leaves me wondering which is best? Also I am unsure if my type of car will affect the tuning of the box therefore leaving me having to tune higher/lower to achieve a true 33-35hz tone? They're going to be powered by a DB Drive 1800 @ 1ohm. It's a daily install hoping to reach a balance of spl and sq. I listen to mostly rock/metal with a little bit of dubstep, rave and rap (if that matters). If your reading this and have box building knowledge, please help me figure this out. I've played around with numbers but can't seem to get it right. Thanks in advance!!!
-
Whats up im sure this has been answered before but im thinking of buying 2 sundown sa 12 d4 im getting rid of my memphis m5s for these i want better bass so i recently had a custom box made 4.50 cu ft tuned at 34 htz i see no sense in haveing another box made at 1.75 cu ft per sub so what i want to know is whats the best amp or what are my options to get optimum potential out of them sa 12s with this box note that the subs are going in the trunk of a lincoln town car thanks. note im really not trying to spend 500 on an amp at max maybe 300 350 or lower which is always better trying to run them at 1 ohm note that i dont have a high output alternator yet but will get one soon and im also running a duralast goold battery i already have the big 3 done and 0 gauge running to what ever amp im going to upgrade to right now i have a memphis audio mc1.1100
-
I finally ordered myself 2 sa12 s ready to see how they sound in my setup. i already have a memphis mclass 1.1100 to push them with, now i need to find a 200+ amp alt for a 2.8l cherolet. Anybody no where to find one? I will recieve them tues or wed from my local dealer he had a 15% off everything so i broke down and dropped the cash. I also have ordered 2 infinity ref 860w for my mid bass, 2 sets of alpine component sets, a pair of kenwood 6x9s and 2 memphis c3 12s. i am putting this all in a 91 isuzu trooper. Hope it fits! lol, back to the point I need to find that alt if anyone has any ideas. -
I recently screwed myself out of a deal and need a new amp. I've been looking around and came across the Sundown SAZ-2500D. (I have an Orion HCCA 12). I just wanted to know what the forum thought about this amp on this sub. I bought a nice sub and I don't want a cheap amp that's why I choose Sundown for an amp, I plan to do this the right way.
-
wats up guys , im wondering wats the pros and cons of running tool maker dual inputs to a crescendo bc3500 or sundown 3500? like will i see a power increase or is even worth it to buy them. -
Looking to buy a Sundown SAX-1200D. Though I may be intersted in similar models ( saz,1000d's etc.) Yes I know I am new to the forum. Payment will be by verified Paypal and Sent to address on paypal account. Im looking to spend around 200$ so hit me up with offers.
-
Ive been looking but havent seen anyone really do (3) v3 z18 subs. i just got 3 of them and have 3 hifonics brutus 2100d and am curious has anyone had experience with these subwoofers? Sundown says 4 ft^3 and that sounds too small. Also, this is my first real system, gathering everything i think i need. Input appreciated.
-
Hey whats up eveyone I ordered a SA-8 v1.5 last week and I have now found some time to start disassembling it and getting it ready to recone. I will order the recone sometime this week when I get some extra funds. Anyway I have removed the cone off the woofer and now I am trying to remove the spiders. However there is a thick layer of glue over the spider and the screws holding the spider landing in? I think that is what it called. Someone please correct me on that cause I would also like to know the name of it. Here is what I am talking about and does anyone know how I can remove these screws so I can remove the spider and coil? Thank you for any help, -James- 90 replies
-
- 1
-
-
- 252chevyboyz
- sundown
- (and 2 more)
-
I basically just want to know if this design will work for my sub, my only concern is the port area, i know 14in of port per cube foot is ok, but it only has 8.5 in of port area, so comment if its good, or bad. Thanks. Sundown SA-8 D4 v.1 Wired at 2 ohms getting about 550 rms 10x23x12 box dimentions 8.5x1x30 port dimentions 34.29 Hz .64 cubes after sub and port displacement 8.50 inch port area 13.28 inches of port area per foot -
Since im shrinking my box from 10 cubes to 8.5 do i still need both 8 " aero ports I had two 8" aero ports in a box that was 9.83 to 10 cubes net but now im shrinking my box to 8 to 8.5 cubic ft net. Can i get away with only using one 8" aero port. I seen a guy who had a box that was like 9 cubes net with four sundown niteshade 12s on about 8k and it was nasty loud. so im wondering since im going to 8-8.5 roughly on the same power this should work rite????
-
looking to upgrade my battery under hood of a 2005 Elantra anything with at least 110AH and 1000+ CA preferably kinetik or xs power wanna stay under the $250 mark. Thanks
-
Hello everyone- I'm fairly new to here, so.. go easy on me. I'm looking at downgrading my system. (Or upgrading from a sony xplod..) I currently have a 12" Sony Xplod, which sucks horribly. It was free, so I can't complain, and my amp is a Hifonics HFI1500.1d -mono. I'm looking at a few different subs, mostly 8's and 10's. Right now, I'm comparing a few different ones. Rockford P3 - 10" Sundown SA-10" (or two 8") Alpine Type-x - 10" What is everyones thoughts on these listed three, for a beginner audiophile, on a limited budget? -
Hey, im new to car audio, im 18 work for minimum wage. I drive a 95 civic ex, so far i have a false floor in with a hifonics 1500d amp mounted to it with a Sa-12 in a prefab box i got for free. I just purchased a table saw and now have everything i need for box building. I was wondering if anyone had a design for Sa-12 box. preferably 35hz tuned. If anyone could give me dimensions with port/vent included. I was looking at doing an aero port if anyone can include that in a design or dimensions please include where to put the port, how long, diameter etc. Thanks in advance please reply! -
I'm very impressed with the quality of the Skar VVX series. I definitely haven't been disappointed. For only two 12s in a Full size SUV there is decent flex and air movement. I have them on just a HiFonics Hfi1000.1 D So they are not getting even the 600RMS each they are recommended. Plus If I'm careful I could probably put 750 to 1000 watts on each sub and they would take it easily. These subs can definitely take a beating and they love hitting nasty lows. http://www.youtube.com/watch?v=UzT9-IlwbhY -
Hey guys i just acquired a sa 8 and after reading many post about it i wanted to try a rear horn design . Can anyone direct me to past post with this design or assist me in the specs for this build . Thank you in advance Rory. -
Hello guys, i'm going to wall a jeep cherokee with 4 zv.4 15" d1's. Is it possible to drive them on a banda 10k? What would you guys recommand me? Regards from germany, Jacob -
.
-
Hello everyone! New to this particular forum. I am looking to replace my old Rockford Fosgate T1 10D4 with something new. I ran the T1 for a long long time then stopped. I just don't feel it hitting in my chest like I remember. So hence the need to upgrade. I am running a Rockford Fosgate Prime R500x1d. Birth sheet says 633 RMS so real world I'm estimating 560 RMS. I have seen the SA-10 rated at 500 RMS but I've seen conflicting details. I do not want to under power this sub. I know the sd.3 is supposed to be more SQ based and has an rms rating of 500 rms. Obviously I would like whichever speaker I decide to have good SQ but I also want to feel it in my chest. I miss that feeling and watching everything in my truck shake. Any opinions or advice in either direction would be much appreciated. Thank you -
Hello people, Does anyone have or know the dimensions of the sundown team 15? I'm trying to build a box but can't seem to find the specs on the sub -Thank you
-
First time posting in this thread. Looking for a reliable hard pounding card audio system for around $1k. It is for a chevy Tahoe. So far I am considering getting a pair of Sundown Audio 12" 750W Dual 4-Ohm with the sundown audio 1500.1 or going with the skar audio 2000.1 monoblock (200$ cheaper). Will custom build the box accordingly and have a solid aftermarket head unit. Does this sound like a good set up for someone looking to get some extra bass from using a pair of L7s in the past? -
A friend wants me to recone his Sundown 10" sub but we can't figure out what model/version it is so we can order the correct recone kit. I've sent 2 emails to Sundown and also a email to directronix for help but so far no response. I don't want to guess and end up with the wrong recone and have to send it back. I've included some pics before the sub was stripped down. Really hope someone can help.
-
Hey guys this is my friend Jeremys Hummer H2 I dont think he is on here so i thought I would share a vid of the setup my bf did for him. Enjoy
