Infinite913 Posted March 31, 2011 Report Share Posted March 31, 2011 Vehicle: 2001 Chevy Astro AWD Alternator: 300amp Iraggi Alternator Batteries: 3 D3400.... 1 up front and 2 in the back Wire: 3 runs of Power Wire HyperFlex... 2 grounds for front battery... 2 seperate grounds per battery in the rear... Alternator wires: 2 runs ran for power from alt and 2 ground from alt Front stage: 2 6.5" oxygen audio compenents( with 2 extra if I am not satisfied with just the 1) Sub Stage: 2 18" Zcons in a 20 cubic enclosure after displacements.... For comps it will be tuned to 36hz with 482sq inches of port area... for daily it will be tuned to 30hz with 321sq inches of port area Amplifier front stage: MB Quart 4 channel Amplifier Sub stage: Stetsom 5k2e @ 2 Ohms ____________________________________________________________________________________________________________________ Link to comment Share on other sites More sharing options...
Infinite913 Posted March 31, 2011 Author Report Share Posted March 31, 2011 Link to comment Share on other sites More sharing options...
Infinite913 Posted March 31, 2011 Author Report Share Posted March 31, 2011 Link to comment Share on other sites More sharing options...
Colin - STAPUFT Posted March 31, 2011 Report Share Posted March 31, 2011 NICE! Love the Astro builds. Nice equipment- gonna' be good. That interior pic where the interior was there and then the next when it was gutted for sound deadening- = lots of work. Tuned in!! 12 - 12"s in the STAY PUFT 1989 Chevy Astro Build & Comment Log Un-Interrupted Build LogYouTube Channel Chevy Trailblazer 5.1 Dolby Digital DTS Install You have a beard of a mysterious sea captain. I would follow you to hell and back. Link to comment Share on other sites More sharing options...
Dj_Scarface Posted March 31, 2011 Report Share Posted March 31, 2011 Think I seen this some where b4.... LoL Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
n8ball2013 Posted March 31, 2011 Report Share Posted March 31, 2011 20 cubes? good dear god. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
zayres29 Posted March 31, 2011 Report Share Posted March 31, 2011 Very nice start Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged Link to comment Share on other sites More sharing options...
Infinite913 Posted April 3, 2011 Author Report Share Posted April 3, 2011 Link to comment Share on other sites More sharing options...
Infinite913 Posted April 3, 2011 Author Report Share Posted April 3, 2011 For your info, here is specs- Final NET- 20.5cuft 4x4s in the corner. angled out at 9x9" in the corners. the middle brace as follows- going from front wall to port wall- glue 3 2x4s together 35.25" long Going from top 2x4 brace to floor on the front wall- glue 2 2x4s together and glue them to the top 2x4 brace, floor and front wall. Do the same for the middle brace, 2 2x4s glued together and glued to top 2x4 brace and floor. For the brace along the back of the port wall- Glue 2 2x4s together (4 total, 2 for each side) Once all 4 are glued together(2 thick pieces now), attach them to the back of the port wall, sides of box and the main 2x4 brace. These 2x4s need to be turned so the 3.5" wide side is vertical so u can get the most surface area of the 2x4s attached to the back port wall. The 3.5" width of the 2x4s are used on the front wall. the 3.5" width of the 2x4s are used on the underside of the top piece. Link to comment Share on other sites More sharing options...
rubbernutz1 Posted April 3, 2011 Report Share Posted April 3, 2011 astros rule Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.