04SDExplorer Posted May 17, 2011 Author Report Share Posted May 17, 2011 Thanks Bro! Hopefully with the helpful advice i've been getting, and the changes that i'm gonna make i'll get the score up. Then when i get my new batts, hopefully it goes up a little more! 2004 Explorer Limited 24" Lexani "pyros" wrapped in 255/30/24 pirelli's 270 Amp MechMan Alt. (2)Stinger SPP-2150's (2)Sundown NightShade 15's IA 40.1 Link to comment Share on other sites More sharing options...
fecupe2001 Posted May 17, 2011 Report Share Posted May 17, 2011 My explorer gains A LOT by moving the passenger seat all the way forward and visors down, i´m pretty sure that should work on yours also I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
04SDExplorer Posted May 17, 2011 Author Report Share Posted May 17, 2011 I'll have to try that! i don't have a passenger side visor, do you think that matters much? 2004 Explorer Limited 24" Lexani "pyros" wrapped in 255/30/24 pirelli's 270 Amp MechMan Alt. (2)Stinger SPP-2150's (2)Sundown NightShade 15's IA 40.1 Link to comment Share on other sites More sharing options...
fecupe2001 Posted May 17, 2011 Report Share Posted May 17, 2011 Believe it or not it should, i tried visors down, forward, closed and even took them out and score changed a lot on all cases, i dropped 0.2 dbs by taking them out if i remember correctly, but once again, it´s a different explorer so who knows? I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
04SDExplorer Posted May 17, 2011 Author Report Share Posted May 17, 2011 That sucks! i have the visor, it broke awhile back, apparently a common issue with 3rd gen's. I'll see if i can rig it up lol 2004 Explorer Limited 24" Lexani "pyros" wrapped in 255/30/24 pirelli's 270 Amp MechMan Alt. (2)Stinger SPP-2150's (2)Sundown NightShade 15's IA 40.1 Link to comment Share on other sites More sharing options...
fritosaregood Posted May 17, 2011 Report Share Posted May 17, 2011 Have you clamped that amp yet to see how much power your getting? seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
04SDExplorer Posted May 17, 2011 Author Report Share Posted May 17, 2011 No i don't have the tools to do so. I would like to though 2004 Explorer Limited 24" Lexani "pyros" wrapped in 255/30/24 pirelli's 270 Amp MechMan Alt. (2)Stinger SPP-2150's (2)Sundown NightShade 15's IA 40.1 Link to comment Share on other sites More sharing options...
SI Guy Posted May 20, 2011 Report Share Posted May 20, 2011 Multiple smaller ports may help your subs load better. But for now you are on the right track. Good #'s man. Link to comment Share on other sites More sharing options...
04SDExplorer Posted May 23, 2011 Author Report Share Posted May 23, 2011 well put the advice i was given to good use, and did back to back 150.0's sealed up @44hz today at the show! Was pretty stoked.. On a shitty note for some reason after i left wendy's after the show, the amp came on like normal, but there's no output now?! not sure what the deal is, voltage is good as well as the subs are fine. Worked perfectly before going in, came out and nothing. There seems to be a ticking sound on the input side, so if it does the same tomorrow i'm gonna take the back off and see if something isn't right then from there guess send it off to db-r. Oh well, next show i'm attending isn't until july so plenty of time to figure out the problem and get it resolved. 2004 Explorer Limited 24" Lexani "pyros" wrapped in 255/30/24 pirelli's 270 Amp MechMan Alt. (2)Stinger SPP-2150's (2)Sundown NightShade 15's IA 40.1 Link to comment Share on other sites More sharing options...
fecupe2001 Posted May 23, 2011 Report Share Posted May 23, 2011 well put the advice i was given to good use, and did back to back 150.0's sealed up @44hz today at the show! Was pretty stoked.. On a shitty note for some reason after i left wendy's after the show, the amp came on like normal, but there's no output now?! not sure what the deal is, voltage is good as well as the subs are fine. Worked perfectly before going in, came out and nothing. There seems to be a ticking sound on the input side, so if it does the same tomorrow i'm gonna take the back off and see if something isn't right then from there guess send it off to db-r. Oh well, next show i'm attending isn't until july so plenty of time to figure out the problem and get it resolved. Congrats on the score, what did you do?? moved the box to the center of the trunk only?? congrats on the 50's maybe some FETs?? i wouldn't know, but at least you hit the 50's so it's cool lol, good luck with the amp... I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.