Jump to content

Recommended Posts

Sup guys its been a while

Started up college and been doing that pretty much full time since last August on top of working 40+ hours since then too. Its summer time again though and I sat down and took some pictures of the car I got back from impound finally. It took us 632 days to get our car back.

On March 8th I towed my car from the impound lot back home and changed out the battery, spark plugs, and changed the oil. Everything started up fine and ran perfect after a new tank of fresh gas. Biggest problem with the car was actually the amount of dust all over it after sitting in a warehouse for almost 2 years.

Got it cleaned up and here are some pictures of it back in March.

IMG_1631.jpg

IMG_1634.jpg

IMG_1635.jpg

and some of the shit that was broken

IMG_1648.jpg

IMG_1651.jpg

The next day I quickly set up my system so I could drive it to work the same way I used to. I left it like that until July.

I took everything out of my trunk and cleaned up all the sawdust from the original install in Jan 09.

IMG_1692.jpg

IMG_1701.jpg

IMG_1698.jpg

A few days later I was done putting everything back in the trunk and wiring some new goodies up in there.

My three amps

Pioneer GM-X574 90wrms x 4ch

IMG_1695.jpg

Crunch PZN2100 75wrms x 2ch

IMG_1696.jpg

Hifonics TXi1508D 1500wrms x 1ch

IMG_1694.jpg

So many wires in my trunk look like a bowl of spaghetti

IMG_1704.jpg

IMG_1708.jpg

Update in a few minutes...

TY

Moet poppin', hoe hoppin', aint no stoppin' B.I.G. poppa, I'm a bad boy

Party and Bullshit - The Notorious B.I.G.

Honest estimate on this truck when it's all done........... 172.3...........

Ehh.. U are aware of what 172.3 is, right?

yep.....:)

Two Pyle 15"s Build log

Link to comment
Share on other sites

Heres the Civic with the trunk put all back together for the time being before I work on it again.

I put all three amps under the carpet for now but plan to move them on top of the carpet when I rebuild the trunk.

The trunk

IMG_1719.jpg

The amps

IMG_1720.jpg

IMG_1721.jpg

IMG_1722.jpg

and now for the good stuff

Ive been working on several things with my LEDs

I have tweaked my Halo lights in order to be able to switch between solid on and reactive to the bass below 80hz

This is controlled from one of the 3 button touch switches I added to my radio panel.

and on both sides of the switch I have added blue LEDs that react to the bass below 80hz.

The 3 button touch switch also controls my amplifier and interrupts the ground to all accessory circuits.

Here are some videos that show everything in action

Heres a walk around of all the LEDs and things

I will try and put up a schematic to everyone to understand how I have it rigged.

And in the LEDs next to the switches green is anything >80hz and blue is <80hz

let me know what ya'll think

Ty

TY

Moet poppin', hoe hoppin', aint no stoppin' B.I.G. poppa, I'm a bad boy

Party and Bullshit - The Notorious B.I.G.

Honest estimate on this truck when it's all done........... 172.3...........

Ehh.. U are aware of what 172.3 is, right?

yep.....:)

Two Pyle 15"s Build log

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1085 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...