lownloud87 Posted August 4, 2011 Report Share Posted August 4, 2011 if i build a ported box, wat would b the best hertz number to go to for groundpounding bass. as in 32 or 33hz etc... as my signature shows ive go 2 T1D412's and a 1000.1 BD rockford fosgate amp. im gunna end up building a bigger and better system later on but for now id like to work with wat ive got already. thank for the help Quote Wicked 4 play car club 2002 Chevy 2 door blazer Real soon setup head unit: PTID-8920B subs: 4 12's or 2 15's hevent made up my mind on brand,ported at 33hz amps: for sure two RF 300.4' for mids and highs, 3sixty.2. stuck on wat sub amp ill be using power supply: big 3 1/0, 2 runs of 1/0 power wire and 2 runs of 1/0 ground wire bacc to the second battery, 8awg, 4awg and depending on the sub amp 4 to 1/0 power and grounds for it. speaker wire: 12awg speaker wire and 8awg for subs speakers: 4x6's dash, 6 1/2 components doors, 5 1/4 components kicks, and 6x9's back. all Infinity Reference misc.: 8000k hid low beams/projector headlights, 3/3 lowering kit, D3400 xspower batt up front and rear, ad244 145 amp alternator Link to comment Share on other sites More sharing options...
bassrace Posted August 4, 2011 Report Share Posted August 4, 2011 32-34hz is usually a safe bet. Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry Link to comment Share on other sites More sharing options...
lownloud87 Posted August 4, 2011 Author Report Share Posted August 4, 2011 32-34hz is usually a safe bet. is there any way u could give me the best box diagram? if so the widest i can go is 37.5 subs up port back. thank you again Quote Wicked 4 play car club 2002 Chevy 2 door blazer Real soon setup head unit: PTID-8920B subs: 4 12's or 2 15's hevent made up my mind on brand,ported at 33hz amps: for sure two RF 300.4' for mids and highs, 3sixty.2. stuck on wat sub amp ill be using power supply: big 3 1/0, 2 runs of 1/0 power wire and 2 runs of 1/0 ground wire bacc to the second battery, 8awg, 4awg and depending on the sub amp 4 to 1/0 power and grounds for it. speaker wire: 12awg speaker wire and 8awg for subs speakers: 4x6's dash, 6 1/2 components doors, 5 1/4 components kicks, and 6x9's back. all Infinity Reference misc.: 8000k hid low beams/projector headlights, 3/3 lowering kit, D3400 xspower batt up front and rear, ad244 145 amp alternator Link to comment Share on other sites More sharing options...
bassrace Posted August 4, 2011 Report Share Posted August 4, 2011 (edited) No sorry bro i cant do designs. if i knew how i would do it for ya for free doe. Theres some free designs on here somewhere. I know ramdesigns on here is da ish doe. This is the one i had for my hdc3s doe I did subs and port same side the 36"by17" side 4.5ft3 with 73in^2 of port area tuned to 33hz should work out for this application. Height-17 Width-36 Depth-22.5 Port Width-4.75 Height-15.5 Length-33 Edited August 4, 2011 by bassrace Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry Link to comment Share on other sites More sharing options...
StrongmanDesigns Posted August 4, 2011 Report Share Posted August 4, 2011 go big and tune to 35hz Quote Link to comment Share on other sites More sharing options...
bassrace Posted August 4, 2011 Report Share Posted August 4, 2011 You could put subs up and port back with that design just put the port on one of the 36"by17" sides Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry Link to comment Share on other sites More sharing options...
lownloud87 Posted August 4, 2011 Author Report Share Posted August 4, 2011 go big and tune to 35hz would 35hz make it hard to breath? i wanna make it to where its hard to breath or theres a pain in your chest when u breath Quote Wicked 4 play car club 2002 Chevy 2 door blazer Real soon setup head unit: PTID-8920B subs: 4 12's or 2 15's hevent made up my mind on brand,ported at 33hz amps: for sure two RF 300.4' for mids and highs, 3sixty.2. stuck on wat sub amp ill be using power supply: big 3 1/0, 2 runs of 1/0 power wire and 2 runs of 1/0 ground wire bacc to the second battery, 8awg, 4awg and depending on the sub amp 4 to 1/0 power and grounds for it. speaker wire: 12awg speaker wire and 8awg for subs speakers: 4x6's dash, 6 1/2 components doors, 5 1/4 components kicks, and 6x9's back. all Infinity Reference misc.: 8000k hid low beams/projector headlights, 3/3 lowering kit, D3400 xspower batt up front and rear, ad244 145 amp alternator Link to comment Share on other sites More sharing options...
StrongmanDesigns Posted August 5, 2011 Report Share Posted August 5, 2011 go big and tune to 35hz would 35hz make it hard to breath? i wanna make it to where its hard to breath or theres a pain in your chest when u breath yup, works pretty good for my 2 12's Quote Link to comment Share on other sites More sharing options...
korey_hofer Posted August 5, 2011 Report Share Posted August 5, 2011 you have a blazer you want to tune to 35hz and face every thing backwards. I've done maybe 20-30 systems in my blazer before it got wrecked, back was the flattest, lowest, and loudest to ear. To the meter subs up metered slightly higher Quote previously known as wenn_du_weinst aka fucking internet coward supreme. I talk shit on other forums like a little bitch and hope i don't get caught out on the street. Link to comment Share on other sites More sharing options...
lownloud87 Posted August 5, 2011 Author Report Share Posted August 5, 2011 go big and tune to 35hz would 35hz make it hard to breath? i wanna make it to where its hard to breath or theres a pain in your chest when u breath yup, works pretty good for my 2 12's DID U GO SUBS UP PORT BACC OR EVEYTHING BACC? Quote Wicked 4 play car club 2002 Chevy 2 door blazer Real soon setup head unit: PTID-8920B subs: 4 12's or 2 15's hevent made up my mind on brand,ported at 33hz amps: for sure two RF 300.4' for mids and highs, 3sixty.2. stuck on wat sub amp ill be using power supply: big 3 1/0, 2 runs of 1/0 power wire and 2 runs of 1/0 ground wire bacc to the second battery, 8awg, 4awg and depending on the sub amp 4 to 1/0 power and grounds for it. speaker wire: 12awg speaker wire and 8awg for subs speakers: 4x6's dash, 6 1/2 components doors, 5 1/4 components kicks, and 6x9's back. all Infinity Reference misc.: 8000k hid low beams/projector headlights, 3/3 lowering kit, D3400 xspower batt up front and rear, ad244 145 amp alternator Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.