bdog Posted September 8, 2011 Report Share Posted September 8, 2011 is it possible to recone a bl with btl soft parts? Quote REP Link to comment Share on other sites More sharing options...
audiofanaticz Posted September 8, 2011 Report Share Posted September 8, 2011 It can be done, however the drop in recone would have to be made by them to get the coil height correct, if they would be willing to do this However the spiders (Just a weaker spider pack with less spiders), cone, surround, tinsels are all the same from BL to BTL, from what I remember the coils are almost identical too. The inner and outer gap of the motor are the same for fully loaded BL to BTL, however the BL woofer has slightly shallower gap and would require the voicecoil to be at a different height. Otherwise the BTL drop in recone, will more then likely bottom out in the BL motor. Quote Link to comment Share on other sites More sharing options...
woodzyspl Posted September 8, 2011 Report Share Posted September 8, 2011 sounds like be easyer todo the same bl soft parts lol Quote AUSTRALIA do i need say more? HU: some crap pionee AMP: dc 9k @ 18v SUB: 4 elevation audio sqx 12" Battery: 2 neuton power 8200d burp setup for fun 152's soon to come: rebuilt soundstream xxx (2 18" OR 3 15" wall) Bunch speakers, more batts and new HU Link to comment Share on other sites More sharing options...
NDMstang65 Posted September 8, 2011 Report Share Posted September 8, 2011 (edited) It can be done, however the drop in recone would have to be made by them to get the coil height correct, if they would be willing to do this However the spiders (Just a weaker spider pack with less spiders), cone, surround, tinsels are all the same from BL to BTL, from what I remember the coils are almost identical too. The inner and outer gap of the motor are the same for fully loaded BL to BTL, however the BL woofer has slightly shallower gap and would require the voicecoil to be at a different height. Otherwise the BTL drop in recone, will more then likely bottom out in the BL motor. No...not at all. The hixamax BTL coil will smack the back plate. The standard flatwind coil for the BTL is the same coil as the flat wind coil option for the BL, but the set up is still different. They use the same spider combination. Moral of the story here..don't order pistons for a blown 572 when you are trying to put them in a 454. The parts are made like they are for a reason. Edited September 8, 2011 by NDMstang65 Quote Authorized Ascendant Audio Dealer! Message me for information. If you can't explain it simply, you don't understand it well enough -Albert Einstein "I have a plausible excuse for not liking you. And you know why." Link to comment Share on other sites More sharing options...
Ray Posted September 8, 2011 Report Share Posted September 8, 2011 But... I want the long travel pre runner shocks on my stock civic. Why not, everyone else is doing it..... Lmao Quote 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz Link to comment Share on other sites More sharing options...
NDMstang65 Posted September 8, 2011 Report Share Posted September 8, 2011 But... I want the long travel pre runner shocks on my stock civic. Why not, everyone else is doing it..... Lmao "Hold my beer and watch this shit" Quote Authorized Ascendant Audio Dealer! Message me for information. If you can't explain it simply, you don't understand it well enough -Albert Einstein "I have a plausible excuse for not liking you. And you know why." Link to comment Share on other sites More sharing options...
splferrell Posted September 8, 2011 Report Share Posted September 8, 2011 i got 2 18'' fi bl d2 with Flatwind coil no cooling Hyper Pole and had 8k daily so why put btl parts, also seen on youtube jbl crown 6000 on 2 but he played 20hz to max them out Quote Link to comment Share on other sites More sharing options...
splferrell Posted September 8, 2011 Report Share Posted September 8, 2011 4 n4 strapped @ .5 with maxxlink clamp right under 8k Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.