Jmoney2544 Posted September 11, 2011 Report Share Posted September 11, 2011 I hear mr car engine as well as my blinkers through my speakers in my car. I can put my volume to 0 and it will still play through my speakers. I hear its something with pioneer decks not being grounded correctly? has this happened to you guys? What should i do? Quote Car: 2002 Buick Regal Wiring: Knu Kolossus 1/0 + JL 4 Gauge Big 3: Stinger HPM 1/0 Alternator: Stock 135 Amp Batterys: Optima RedTop (Hood) XS D3100 (Trunk) HeadUnit: Pioneer DEH-4200UB Subs: (2) AQ HDC3 12's Sub Amp: AQ 2200D Sub Box: 4.6 Cubes @ 36hz Mids & Highs: (Front) Rockford Fosgate Power T1693 3-Way 6x9's Mids & Highs: (Rear ) Rockford Fosgate Power T152S 2-Way Component 5.25" Speaker Amp: AQ4x90 Sound Dampener : 75 Ft Fatmat Link to comment Share on other sites More sharing options...
lifted_silverado Posted September 11, 2011 Report Share Posted September 11, 2011 Happened to my old pioneer deck, check your grounds also and make sure you dint have your power wire ran next to your RCAs or speaker wires. Its usually small over looked things Quote Everythings in the attic or garage since the truck was sold last year. New build should be coming soon in a dodge cummins Link to comment Share on other sites More sharing options...
jconnway Posted September 11, 2011 Report Share Posted September 11, 2011 well are you running amplifiers or are the speakers directly off the deck? if you have a 4 channel amp, its that ground. a common solution to this is to make a run of 0 gauge from the battery ground to the rear of the car where you ground the amp. i did this personally and it worked great, i have no static or engine noise. and i run a Pioneer 7100BT deck Quote Full Pioneer Build 4 Per Door - Front Door Build Up Link to comment Share on other sites More sharing options...
Jmoney2544 Posted September 11, 2011 Author Report Share Posted September 11, 2011 well are you running amplifiers or are the speakers directly off the deck? if you have a 4 channel amp, its that ground. a common solution to this is to make a run of 0 gauge from the battery ground to the rear of the car where you ground the amp. i did this personally and it worked great, i have no static or engine noise. and i run a Pioneer 7100BT deck ive checked all my grounds and there all secure and tight. I have no idea what this could be. Someone at this local shop said that pioneer has had this problem for over 10 years and still havnt been able to fix it. he said to wrap a wire along my rca and ground that. Quote Car: 2002 Buick Regal Wiring: Knu Kolossus 1/0 + JL 4 Gauge Big 3: Stinger HPM 1/0 Alternator: Stock 135 Amp Batterys: Optima RedTop (Hood) XS D3100 (Trunk) HeadUnit: Pioneer DEH-4200UB Subs: (2) AQ HDC3 12's Sub Amp: AQ 2200D Sub Box: 4.6 Cubes @ 36hz Mids & Highs: (Front) Rockford Fosgate Power T1693 3-Way 6x9's Mids & Highs: (Rear ) Rockford Fosgate Power T152S 2-Way Component 5.25" Speaker Amp: AQ4x90 Sound Dampener : 75 Ft Fatmat Link to comment Share on other sites More sharing options...
EBW Posted September 11, 2011 Report Share Posted September 11, 2011 (edited) Try grounding the chassis of the deck to the ground of your amp, I know its a pain but it almost always fixes this issue Edited September 11, 2011 by EBW Quote Kenwood KIV-BT900 Front Stage RF 400-4 Runs off dedicated 4 awg ofc RE 6.5 125.5. Lanzar Max Pro 6.5 Boston S60 6.5 components Rear Soundstream BX-15 Boston S60 6.5 components 4x Sundown SA8 v1.5 Crescendo BC3500D 2.4 net 28hz 4 runs of 0 gauge Big 3 HC2400 700ca up front Singer 350 Amp Alt No deadener :/ Scytek Galaxy Alarm Link to comment Share on other sites More sharing options...
tdsa23 Posted September 11, 2011 Report Share Posted September 11, 2011 well are you running amplifiers or are the speakers directly off the deck? if you have a 4 channel amp, its that ground. a common solution to this is to make a run of 0 gauge from the battery ground to the rear of the car where you ground the amp. i did this personally and it worked great, i have no static or engine noise. and i run a Pioneer 7100BT deck ive checked all my grounds and there all secure and tight. I have no idea what this could be. Someone at this local shop said that pioneer has had this problem for over 10 years and still havnt been able to fix it. he said to wrap a wire along my rca and ground that. This what I do with my pioneer deck and it has worked for me. Quote XS Power D5100, 2 D2700s, & 2 D975s MechMan 220a Alt DC 5K Kicker 650.4 2 12 Ascendant Audio Mayhem's Pioneer DEH-P7200HD Rockford Fosgate 3sity.1 Build log: http://www.stevemeadedesigns.com/board/topic/166792-88-nissan-maxima-trunk-build/#entry2430899 http://www.stevemeadedesigns.com/board/topic/191439-lexus-is300-fi-crescendo-shca-rf-pics/ Link to comment Share on other sites More sharing options...
Pauliesnite93 Posted September 12, 2011 Report Share Posted September 12, 2011 I have the same probams. i have a pioneer avh-4200dvd. i have my back batt. grounded to the frame. a guy at my local car audio placse grounded the rcas at the high amp and it even made it worst. Quote Whip:2004 Ford Expedition Headuint:Pioneer AVH-P4200DVD Alt:MechMan 270 Amp Big 3: Yes Rear batts:2x Kinetik HC2400 Power Wire:carolprene 0/2 welding wire Volt Meter:X Scorpion Front stage:Kicker KS6502 Rear stage:Polk audio 6x8s High Amp:Boston acoustic GT-4100 Sub stage:Audio Que HDC3 18s Copper Coils D2 Low Amp:Audiopipe AP30001D Box:6ft3 96in2 34hz 146.8 dbs @ 35hz Sealed up Link to comment Share on other sites More sharing options...
tdsa23 Posted September 12, 2011 Report Share Posted September 12, 2011 I have the same probams. i have a pioneer avh-4200dvd. i have my back batt. grounded to the frame. a guy at my local car audio placse grounded the rcas at the high amp and it even made it worst. you have to ground the RCAs at the deck not the amp. Quote XS Power D5100, 2 D2700s, & 2 D975s MechMan 220a Alt DC 5K Kicker 650.4 2 12 Ascendant Audio Mayhem's Pioneer DEH-P7200HD Rockford Fosgate 3sity.1 Build log: http://www.stevemeadedesigns.com/board/topic/166792-88-nissan-maxima-trunk-build/#entry2430899 http://www.stevemeadedesigns.com/board/topic/191439-lexus-is300-fi-crescendo-shca-rf-pics/ Link to comment Share on other sites More sharing options...
deepsilencer Posted September 12, 2011 Report Share Posted September 12, 2011 ground your rcas Quote TEAM FLEX ISSUES,TEAM DC AUDIO 2000 Silverado Ext 1500 v.3 (Walled Silverado) 4 DC Power 270a Alts on A DC Power Quad Alt Bracket XS Power VCM,Stinger Volt Meters 4 AA Mayhem 18s 2 DC Audio 9.0ks Strapped 1 DC Audio 175.4 4 Selenium 6.5s & 4 Selenium 8s 4 Selenium Super Tweeter st350s 72 SQ Ft Of Stinger Roadkill Expert Alpine CDA 9887 XS Power d3400(Hood),6 XS Power d3100s(Bed) & much more..... 2011 Meca CA State Champion & State Record Holder In M5 Meca SPL:158.2 Meca P&P:137.4 DB Drag:159.1 USACI:161.2 BUILD LOG.....YOUTUBE CHANNEL.....FEEDBACK Link to comment Share on other sites More sharing options...
BJD3 Posted September 12, 2011 Report Share Posted September 12, 2011 (edited) Wrap a piece of wire around the barrel of the RCAs on the deck and ground it to the chassis. EDIT:The chassis of the deck. Edited September 12, 2011 by BJD3 Quote Anti Peel and Seal...lol You may be offended by the above. Don't take it personally, I'm just abrasive. 2002 Buick Park Avenue DC Level 4 M2 12 D2 Car Audio Bargain 1600.1 Eclipse CD3200 ~2 cubes @ 34 hz. Stinger Roadkill Expert Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.