OrionStang Posted December 30, 2011 Report Share Posted December 30, 2011 32x6x30 Good luck. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
pittross Posted December 30, 2011 Author Report Share Posted December 30, 2011 32x6x30 Good luck. so something like this Quote Link to comment Share on other sites More sharing options...
fmedina Posted December 30, 2011 Report Share Posted December 30, 2011 32x6x30 Good luck. so something like this What's the specs on this one Quote Link to comment Share on other sites More sharing options...
pittross Posted December 30, 2011 Author Report Share Posted December 30, 2011 (edited) 32x6x30 Good luck. so something like this What's the specs on this one same 35x50x19 port 33.5x6x29.5 Edited December 30, 2011 by pittross Quote Link to comment Share on other sites More sharing options...
AmericanLegend Posted December 30, 2011 Report Share Posted December 30, 2011 True. ^^ You need a port big enough to have to bend lol. Just use a program or port calculator if you're confused. Go with as much port as you can squeeze into your airspace up to 18-20 square inches/cubic foot... Quote Link to comment Share on other sites More sharing options...
fmedina Posted December 30, 2011 Report Share Posted December 30, 2011 If you used the same dimension but made port bigger your net volume will decrease. Im not home but what's your net for both sides after all displacements. Quote Link to comment Share on other sites More sharing options...
pittross Posted December 31, 2011 Author Report Share Posted December 31, 2011 help Quote Link to comment Share on other sites More sharing options...
fecupe2001 Posted December 31, 2011 Report Share Posted December 31, 2011 (edited) 32x6x30 Good luck. so something like this What's the specs on this one same 35x50x19 port 33.5x6x29.5 I hope you have enough power to feed those subs, box is very small if you go with the measures you just gave, i would do a port 33.5 x 5.25 x 22 , that would raise your internal around 1.5 cubic feet with a 33 hz tuning, that should sound better than the smaller box with bigger port, that´s a C pillar wall???? Edited December 31, 2011 by fecupe2001 Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
pittross Posted December 31, 2011 Author Report Share Posted December 31, 2011 32x6x30 Good luck. so something like this What's the specs on this one same 35x50x19 port 33.5x6x29.5 I hope you have enough power to feed those subs, box is very small if you go with the measures you just gave, i would do a port 33.5 x 5.25 x 22 , that would raise your internal around 1.5 cubic feet with a 33 hz tuning, that should sound better than the smaller box with bigger port, that´s a C pillar wall???? ok but how far i make the bend from the back wall 5.25 Quote Link to comment Share on other sites More sharing options...
fmedina Posted December 31, 2011 Report Share Posted December 31, 2011 if ou need help aon a design shoot me a pm and ill see what i can do for ya. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.