Wallaceman Posted February 19, 2012 Report Posted February 19, 2012 (edited) These are the plans for the new box that i'm building for my 2002 Explorer, and yes it will fit. It's for 4 18" Acoustic Audio 18's, so yes this is a budget build. As in under $800 build... but here's the specs for the box: 1" MDF all around Dimensions: 40 x 39 x 22 Port Dimensions: 20 x 37.5 x 3.5 Gross Volume: 16.27 ft^3 Tuning Frequency: 29.41Hz Port Area: 131.25 in^2 there will be a 1/4 sheet of MDF on top of the face sheet for counter sink... This is similar to lil_wallbangers 4 18 box as far as port design. the subs are "Light weights" and only weigh 17 pounds each... but that's all my budget allows. but ill still build the box up to 1 1/2 to 3" or so.. Let me know what you think http://www.facebook....&type=1 http://www.facebook....&type=1 http://www.facebook....&type=1 I could not get the images posted so you have to use the links, sorry. Edited February 20, 2012 by Wallaceman Quote Just be honest, it's always a work in progress with ever changing plans.
Wallaceman Posted February 20, 2012 Author Report Posted February 20, 2012 (edited) Edited February 20, 2012 by Wallaceman Quote Just be honest, it's always a work in progress with ever changing plans.
Wallaceman Posted February 20, 2012 Author Report Posted February 20, 2012 ah, got it! Quote Just be honest, it's always a work in progress with ever changing plans.
Joe X Posted February 20, 2012 Report Posted February 20, 2012 I would make a box solid for future replacement of those drivers or make me a single good quality driver box and save the space for omething else... of course that's just me! Quote
Wallaceman Posted February 20, 2012 Author Report Posted February 20, 2012 I would make a box solid for future replacement of those drivers or make me a single good quality driver box and save the space for omething else... of course that's just me! both sound good Quote Just be honest, it's always a work in progress with ever changing plans.
412 CVX Posted February 20, 2012 Report Posted February 20, 2012 those look like crap drivers... i'd get some obsidian 18's if you really want the cone area... maybe start out with 2 decent 18's and go from there. you really don't need to do 4 18's to get loud. a couple obsidian 18's on 2k or so would be pretty damned loud. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
Guest Posted February 20, 2012 Report Posted February 20, 2012 those look like crap drivers... i'd get some obsidian 18's if you really want the cone area... maybe start out with 2 decent 18's and go from there. you really don't need to do 4 18's to get loud. a couple obsidian 18's on 2k or so would be pretty damned loud. x2 this... Quote
Wallaceman Posted February 20, 2012 Author Report Posted February 20, 2012 those look like crap drivers... i'd get some obsidian 18's if you really want the cone area... maybe start out with 2 decent 18's and go from there. you really don't need to do 4 18's to get loud. a couple obsidian 18's on 2k or so would be pretty damned loud. Yeah im looking at the PSI Platform 3's but the cheap ones are to hold me over till i can get them. Quote Just be honest, it's always a work in progress with ever changing plans.
Wallaceman Posted February 20, 2012 Author Report Posted February 20, 2012 I would make a box solid for future replacement of those drivers or make me a single good quality driver box and save the space for omething else... of course that's just me! so basically just bulk the box up by adding more MDF? I'm trying to stay away from bracing as much as possible. Quote Just be honest, it's always a work in progress with ever changing plans.
Wallaceman Posted February 20, 2012 Author Report Posted February 20, 2012 I would make a box solid for future replacement of those drivers or make me a single good quality driver box and save the space for omething else... of course that's just me! so basically just bulk the box up by adding more MDF? I'm trying to stay away from bracing as much as possible. Quote Just be honest, it's always a work in progress with ever changing plans.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.