Jump to content

TDH PT Loser! updates! *PICS!*


Recommended Posts

The MLA cost me 230, I paid a little more for the dual voltage one. I believe the regular one was about 185.

And about the skipping cd, I had problems with that, until I bought the Clarion. I think it's just the way bass travels in these cars. But you need a HU with skip protection, and even then, when you get really loud, it's gonna skip. The best way to not skip is to use an mp3 player. Although I swear I had my ipod skip a few times too.

Crazy bass!

Anyway, good luck man!

Awesome Build !!!

so this was underwraps till i got it out to a show, but now its out to the public till i start a rebuild this summer :P

heres the equipment list for now, this is just temp for a few months till i get money together

H/U- Pioneer Premier DEH-610BT

front speakers- orion 6.5's one in each door

rear speakers- none

Alt- Singer 250amp (gunna order this soon)

amp for the speakers- Power bass mini 2ch 100 watts a channel or some shit

sub amp- DC 3.5k

subs- 2 lvl 4 15's wired at .5 for comps, and 2ohms daily

Box- 5.5 cubes roughly, 120sq" of port, somewhere between 36-42hz tuning, my friend did the design and any type of low sounds like shit, so the box is gunna get rebuilt soon

1/2 all thread for bracing, only one rod is through the floor for now, ones above the gastank and the other is above the shock

box rebuild starting weds, 4th order no wall!

Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k!

Why would you EVER WANT flex?
huh?...flex is what can make the lows lower and more air being pushed correct?
jeff_zps9bc81ace.jpg

me_zps0fb5a5b4.jpgMy FeedbackJeep-BuildlogPT LOSER buildlog

Link to comment
Share on other sites

  • Replies 86
  • Created
  • Last Reply

i want to repaint it a candy red and black two tone, then tint the taillights and do 5% on the back windows and 35% on the front

maybe drop it a bit, idk yet, paint is gunna be down the road

20120217_144835.jpg

20120217_144910.jpg

seats pop right out, gotta love it, cool thing is, everything is flat up to where you put your feet, so thats perfect

radio is in, well been in, i wanna put the bass knob right inbetween where those switches are right below the radio, theres a dead plug behind there so no need for it, i cant figure out where to put the volt meter though

20120217_144851.jpg

Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k!

Why would you EVER WANT flex?
huh?...flex is what can make the lows lower and more air being pushed correct?
jeff_zps9bc81ace.jpg

me_zps0fb5a5b4.jpgMy FeedbackJeep-BuildlogPT LOSER buildlog

Link to comment
Share on other sites

:ninja: i think the ports big enough this time around :P, im bracing with 1/2 all thread, and im bolting it to the floor with the all thread too, im also not making a false floor for the time being, im gunna hold off on that till i get my alt

20120219_202025.jpg

20120219_210320.jpg

Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k!

Why would you EVER WANT flex?
huh?...flex is what can make the lows lower and more air being pushed correct?
jeff_zps9bc81ace.jpg

me_zps0fb5a5b4.jpgMy FeedbackJeep-BuildlogPT LOSER buildlog

Link to comment
Share on other sites

20120221_183704.jpg

20120221_183657.jpg

20120221_174048.jpg

Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k!

Why would you EVER WANT flex?
huh?...flex is what can make the lows lower and more air being pushed correct?
jeff_zps9bc81ace.jpg

me_zps0fb5a5b4.jpgMy FeedbackJeep-BuildlogPT LOSER buildlog

Link to comment
Share on other sites

20120221_183704-1.jpg

20120222_211103.jpg

20120223_162650.jpg

20120223_162704.jpg

20120223_162713.jpg

20120223_162727.jpg

20120223_162737.jpg

20120223_162745.jpg

20120223_162753.jpg

20120223_183935.jpg

20120223_183943.jpg

20120223_183953.jpg

20120223_200325.jpg

im leaving the excess all thread on the top for now because im bolting it to the car wit that, and im doing a floor sooner or later so im waiting on that, other then that it sounds pretty good, a bit of a higher tuning then a wanted but other then that it sounds good, it doesnt sound nearly as loud since im only at 2ohms, and a stock alt, once i get my h/o alt im back down to .5 and hopefully louder, makes my damn CD skip though which is a good sign lol, also needs to be deadened, ill see if i can get a vid or 2 soon, subs barely even move LOL

Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k!

Why would you EVER WANT flex?
huh?...flex is what can make the lows lower and more air being pushed correct?
jeff_zps9bc81ace.jpg

me_zps0fb5a5b4.jpgMy FeedbackJeep-BuildlogPT LOSER buildlog

Link to comment
Share on other sites

Off to a great start!

P.S. How old are the pics? if they are of this month... I hate you for not having snow!!!

Click Links To View Build Logs

1994 - Mazda B3000 (Daily/Toy/Show)

2002 - Mazda Protege (Daily)

1995 - Hyundai Accent (R.I.P.)

1984 - Bronco II (Restoration Project)

Youtube Channel

Link to comment
Share on other sites

post-29627-0-52991400-1330909895_thumb.jpg

last pic for now, other then that its pretty much done for a bit, waiting on my tax return to get my alt, then after that prob some bullshit stuff here and there, enjoy.....TDH BITCHES!

edit: havent gotten snow here pretty much all year....sucks, jersey sucks lol, we got snow in OCT, and a little in jan. but it all melted the next day

Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k!

Why would you EVER WANT flex?
huh?...flex is what can make the lows lower and more air being pushed correct?
jeff_zps9bc81ace.jpg

me_zps0fb5a5b4.jpgMy FeedbackJeep-BuildlogPT LOSER buildlog

Link to comment
Share on other sites

damn no love? you guys suck lol, took it out to the philly show and god damn ive never seen so many people lol, got some approval from some random peeps and some team members so alls good, box will be getting a rebuild here shortly, just need someone who knows what there doing to design it lol, holding off on the alt till i get my tax return, should be a good 700$ so thats good

Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k!

Why would you EVER WANT flex?
huh?...flex is what can make the lows lower and more air being pushed correct?
jeff_zps9bc81ace.jpg

me_zps0fb5a5b4.jpgMy FeedbackJeep-BuildlogPT LOSER buildlog

Link to comment
Share on other sites

joo are still quiet

-Matt

2005 Dodge Magnum RT
JVC KD-AVX1

2 PPI S580.2

Obsidian Audio ST1 Horn Tweeters

PRV 8MB450s

Audio Legion 3500.1D

2 RE MT 18s

360 ah LiFePO4 Battery
SHCA 2/0

155.2 @ 29 hz



Kicker CVR 15's build
DD 3512e build
Mini T-Line Build
(6) 8s Build
Nightshade 15s Wall Build
Magnum AB XFL 12s Build
Newest Magnum Build

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 190 Guests (See full list)




×
×
  • Create New...