Jump to content

Recommended Posts

i guess i will start with the taillights. i used dupli-color clear primer and perfect match paint.100_3992.jpg

all taped up100_3995.jpg

first coat100_3996.jpg

5 coats100_3997.jpg

the center is finished100_3999.jpg

sides are finished100_4112.jpg

after all put back together

http://www.stevemead...new-xfl-pg6-57/americanbass hd 12d22 audiopipe 1800.1ppi s580.4rockford p1653 frontpolk audio 6x9 rearbig 3

Link to comment
Share on other sites

time to redo my amps and make my trunk look better

100_3994-1.jpg

this was my setup for a while. im running a audiopipe ap1500.1 for the subs and a ap1504 for the mids and highs.

here is the battery holder i finally got around to making to keep the battery from sliding around the trunk

100_4099.jpg

I put a peice of OSB on the floor of the trunk to rout all of my wires under the amp rack. Zip tied all of my power and ground wires together to keep them away from the rca cables

100_4102.jpg

100_4103.jpg

http://www.stevemead...new-xfl-pg6-57/americanbass hd 12d22 audiopipe 1800.1ppi s580.4rockford p1653 frontpolk audio 6x9 rearbig 3

Link to comment
Share on other sites

100_4101.jpg

i also have strobes in my headlights and taillights thats the controler on the back of the box

here is the amp rack before i put it in the trunk100_4100.jpg100_4104.jpg

now with it in the car100_4106.jpg

got the plate cut to fit over the amps100_4105.jpg

all carpted100_4113.jpg

thats it for now

http://www.stevemead...new-xfl-pg6-57/americanbass hd 12d22 audiopipe 1800.1ppi s580.4rockford p1653 frontpolk audio 6x9 rearbig 3

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...