SimonSezGoDwnBit Posted April 21, 2012 Report Share Posted April 21, 2012 HAVE AN ORION 2400 HOOKED UP TO A 12 L7 I JUST SWITCHED TO A PORTED BOX, TURN THE CAR ON AND THERES NO SOUND COMING THROUGH THE AMP AND THE EP INDICATOR LIGHT IS STAYING ON... IVE CHECKED MY 12V GROUND AND REMOTE WIRES AND THEY ARE ALL GOOD... HELP PLEASE... googled it and couldnt come up with anything Quote Link to comment Share on other sites More sharing options...
SimonSezGoDwnBit Posted April 21, 2012 Author Report Share Posted April 21, 2012 esp indicator** Quote Link to comment Share on other sites More sharing options...
Kranny Posted April 21, 2012 Report Share Posted April 21, 2012 (edited) that light staying on means normal operation, according to this manual http://www.directedd...%2805-06%29.pdf did you wire the sub to the amp? are you sure you have ALL speaker wires connected where they have to go? did you accidentally hit the rca's when moving the box? Edited April 21, 2012 by Kranny Quote Link to comment Share on other sites More sharing options...
n8ball2013 Posted April 21, 2012 Report Share Posted April 21, 2012 when illuminated (yellow) indicates ESP® functionality and is used to diagnose ESP® features. The LED flash characteristics will assists in diagnosing the type of fault (see Appendix). NOTE: The LED on top of the amplifier may also illuminate and flash with the ESP® LED indicator, if this option has been enabled by your installer (requires Bitwriter® ). 12. ESP® Port - connection port for Bitwriter® or ESP2 security system. a little google and you too can be dangerous Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
SimonSezGoDwnBit Posted April 22, 2012 Author Report Share Posted April 22, 2012 i googled it but all i came up was people with a flashing light and mine was solid so i figured id askk!!!! but i think i figured it out i took the sub out and pulled the box terminals and tightened them cause i noticed they were loose and viola it worked Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.