Jump to content

SMD VU DIN is BACK- Presale open! A couple pics / vid - Shipping NOW UPDATE PAGE 6


Recommended Posts

Did anyone else notice the dancing banana on the back of it? And I believe Johnny Chimpo is on the opposite side...... :peepwall:

The banana is Juan Rodriguez's stamp. The guy that is printed on the PCB is Tony D'Amore. My 3sixty.2 has tony's name on it since he designed part of the system. Its more of a thing RF did and since Juan and Tony worked there they still do it to show who designed and came up with the system. I took apart my DD-1 and CC-1 as well and they had the same printings on them for their names. I cant wait to get my two vu-1's for my truck. Im still thinking of a place to mount them at since they are too big to stuff in my dash and the center console has no room at all with the stupid shift knob being in there. I had an idea to use the headliner but that may be kinda bad since when i get super low notes that headliner moves as much if not the same as my sub moves and that would probably snap the boards in half from flexing them. If i had enough room id relocate my HVAC controls and shove them in my center console under the storage compartment. Ill see when i get them. Steve had them ready to ship and called me today when i wasnt home and said one part of my order (probably the xs intellicharger) was not in stock until next week. Either way i dont need them right away but im still happy to have gotten Steve to let me know what was going on, not be surprised that 2 weeks later my items arrive at home lol. So thanks Steve!!

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

Did anyone else notice the dancing banana on the back of it? And I believe Johnny Chimpo is on the opposite side...... :peepwall:

The banana is Juan Rodriguez's stamp. The guy that is printed on the PCB is Tony D'Amore. My 3sixty.2 has tony's name on it since he designed part of the system. Its more of a thing RF did and since Juan and Tony worked there they still do it to show who designed and came up with the system. I took apart my DD-1 and CC-1 as well and they had the same printings on them for their names. I cant wait to get my two vu-1's for my truck. Im still thinking of a place to mount them at since they are too big to stuff in my dash and the center console has no room at all with the stupid shift knob being in there. I had an idea to use the headliner but that may be kinda bad since when i get super low notes that headliner moves as much if not the same as my sub moves and that would probably snap the boards in half from flexing them. If i had enough room id relocate my HVAC controls and shove them in my center console under the storage compartment. Ill see when i get them. Steve had them ready to ship and called me today when i wasnt home and said one part of my order (probably the xs intellicharger) was not in stock until next week. Either way i dont need them right away but im still happy to have gotten Steve to let me know what was going on, not be surprised that 2 weeks later my items arrive at home lol. So thanks Steve!!

actually the vu-din wont be in till next week, duhh!! I have the intellichargers :)


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

Any promo code for us cheap asses that want to get the DD-1 and CC-1 combo pack? :)

SMDCP15 :)

Thanks man!

Order was placed for the combo about an hour ago.

Tried to send you a PM to give some appreciation but noticed you turned that off. lol

Thanks again and if you wanna tag em both with your signature by all means feel free!!!

thank you and your welcome and thank you for saying thank you. :)


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

Are the SMD stickers included with this Steve? I never got any with my DD-1 lol. So I just figured that If I pay $120 for an SMD sticker, I should get a free VU meter with the purchase, right?? Lol ;)

yes sir i will put stickers in the box. The reason you probably didn't get stickers is because in the beginning i didn't have the means to make them....now i do. Some people got stuff others didn't for the simple fact i am evolving over time :)


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

Did anyone else notice the dancing banana on the back of it? And I believe Johnny Chimpo is on the opposite side...... :peepwall:

The banana is Juan Rodriguez's stamp. The guy that is printed on the PCB is Tony D'Amore. My 3sixty.2 has tony's name on it since he designed part of the system. Its more of a thing RF did and since Juan and Tony worked there they still do it to show who designed and came up with the system. I took apart my DD-1 and CC-1 as well and they had the same printings on them for their names. I cant wait to get my two vu-1's for my truck. Im still thinking of a place to mount them at since they are too big to stuff in my dash and the center console has no room at all with the stupid shift knob being in there. I had an idea to use the headliner but that may be kinda bad since when i get super low notes that headliner moves as much if not the same as my sub moves and that would probably snap the boards in half from flexing them. If i had enough room id relocate my HVAC controls and shove them in my center console under the storage compartment. Ill see when i get them. Steve had them ready to ship and called me today when i wasnt home and said one part of my order (probably the xs intellicharger) was not in stock until next week. Either way i dont need them right away but im still happy to have gotten Steve to let me know what was going on, not be surprised that 2 weeks later my items arrive at home lol. So thanks Steve!!

actually the vu-din wont be in till next week, duhh!! I have the intellichargers :)

(face palms self) lmao i knew that :peepwall: Either way im cool with waiting. Thanks though for calling and letting me know. Good customer service and when my dad talked with you on the phone he said you were nice and great to talk with about the order.

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

I know it's all in the beginning stages but future reference. Would be neat to have a smaller single version just for say subwoofers only. Same height just only ~3 inches wide with one set of lights for it. Could have mids in stereo and sub mounted right under. Would look nice.

Edit: even better idea. Half vu din, half volt meter to cut down on crap I need to install. Lol

Edited by Robert8252

2013 F150 Crew Cab



Old Build Log



Feedback



2013 F150

Equipment - Some Awesome Stereo Sound Making Stuff

Link to comment
Share on other sites

  • 2 years later...

TTT! the VU-DIN is back! Pre-sale is now open!! Please see the OP for the changes i edited (to make it current)

  • Like (+1 Rep) 1


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 244 Guests (See full list)

×
×
  • Create New...